Laserfiche WebLink
Healy Model CX6 Series Hose Adaptors <br /> The Healy CX6-A is a cast aluminum adaptor fitting which is used to adapt a gasoline dispenser <br /> (pump) to accept a Healy Phase (Stage) II inverted coaxial vapor recovery hose. Only a Healy <br /> Certified Technician shall perform installation, maintenance and repair of model CX6 series hose <br /> adapters. <br /> Before Installation: <br /> • Read these instructions before installing the adaptor. <br /> • Close crash (shear) valves in the dispenser and make sure electrical is shut <br /> off and locked out. <br /> Tools Required: <br /> • 15" adjustable wrench <br /> • 1-1/2" open end wrench <br /> • UL listed pipe sealant <br /> • Torque wrench <br /> Caution: <br /> The adaptor has 1" female pipe thread on one end (to be attached to the dispenser <br /> product outlet via a 1" male pipe thread fitting) and 1-1/4-18 female straight thread on <br /> the other (for attachment of the Healy coaxial hose). <br /> Installation: <br /> • Apply pipe sealant to the 1" male pipe thread end of the piping fitting to be <br /> installed to the adaptor and attach to the 1" female pipe thread end of the <br /> adaptor. <br /> • Apply pipe sealant to the other male pipe thread end of the pipe fitting to be <br /> installed to the dispenser outlet and install assembly to the dispenser. <br /> • Tighten adapter and pipe fitting assembly into dispenser outlet to 80 foot <br /> pounds. <br /> • Select the Healy coaxial hose for assembly to adapter outlet and connect per <br /> hose instructions. <br /> 5-1 <br /> GARB Approved IDM 5-Healy Hose Adapter Model CXG Series-Executive Orders VR-201 and VR-202 <br />