COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

577014-071 CATLOW Recommended Instructions DATE 03/2016 CAM TWIST MAGNETIC BREAKAWAY Model: CTMCA IF SEPARATION OCCURS 1. Isolate/turn off dispenser,relieve line pressure from the whip hose and the nozzle hose.Drain fuel into an approved metal container. 2. Inspect the entire system for damage and/or leaks. Replace any damaged components in the system(PEIIRP500-119.2.2). 3. Clean the magnet surfaces on both the male and female couplings and inspect for damage. 4. Replace damaged o-rings using CATLOW repair kit. Lubricate the o-rings and the mating male and female surfaces with oil or grease. 4a On Model CTMCA,O-rings must be replaced using CATLOW repair kit P.N.#2977. 5. Align the flow arrows and push the halves together engaging the coupling mechanism until a noticeable snap is felt and the etched guide mark above the letters CTMCA on the nozzle half of the breakaway is not visible(see illustrations on page 3). 6. Test the reconnection by pulling on the hose just below the breakaway. 7. Activate/turn on the dispenser and purge the hose and nozzle of air into an approved metal container. 8. With the system pressurized,check for leaks around the breakaway,nozzle,both hoses and alljoints. 9. Replace any item that exhibit signs of leakage. RETROFITTING PLASTIC COVER 4736 ONTO BREAKWAY 1. Disassemble the whip hose from the breakaway(see Figure 1 below).NOTE:After disconnecting the whip hose from a CTMCA with M3418 adapters,ensure the ferrule does not get discarded(if it should come out of the breakaway when the hose is disconnected).Refer to the illustration in Step 5 of the INSTALLATION INSTRUCTIONS FOR THE CTMCA BREAKAWAY on page 1. 2. Slide breakaway cover 4736 onto the whip hose(see Figure 2 below). 3. Re-attach the hose to the M3418 adapter and tighten to 50 ft-lbs torque(see Figure 3 below).CAUTION: Torque adjacent parts only(e.g.,hose and adapter to which it connects). 4. Slide down the cover onto the breakaway as far as it will go(see Figure 4 below). Whip Hose M3418 Adapter M3418Adapter Figure 1. Whip hose Figure 2. / Breakaway cover 4736 M3418 Adapter M3418Adapter Figure 3. Figure 4. PAGE 2 OF 4 2750 US RT 40 WWW.CATLOW.COM TIPP CITY,OHIO 45371 USA Phone(800)222-8569 Fax(937) 898-8631 ©2016 Veeder-Root LLC. All Rights Reserved.