Laserfiche WebLink
BELOW • UND PRODUCTS www . opwglobal . com <br /> 1 -2100- PEVR Series 1 -2100-DEVR Series OPW 1 - 2100- EVR <br /> Vapor Recovery Spill Container Product Fill Spill Container Series Direct Bury <br /> Spill Containment <br /> Y7 For CARB/ EVR <br /> ` The OPWThread - On 1 - 2100- EVR <br /> Series Spill Containers are certified <br /> for installation on OPW Phase I EVR <br /> Systems . All Fill Port Spill Containers <br /> - feature an enhanced 1 DK-2100- EVR <br /> 6 R � vapor tight drain valve (DEVR Models) . <br /> The Vapor Return Spill Containers (PEVR <br /> Models) feature a permanent plug in <br /> the drain port as per EVR requirements, <br /> I`r The 1 -2100- EVR Series Thread - On Spill <br /> itI Containers are available in Composite <br /> DRAIN PLUG 1 -I- 7150-400C-EVR or Cast Iron bases with either 5 or <br /> SERIES OVERFILL 15 -gallon buckets. <br /> PREVENTION VALVE <br /> The FSA-400 Threaded Riser Face Seal <br /> I Adaptor is installed on the fill pipe <br /> - �' below the spill container to provide a <br /> true sealing surface for the drop tube <br /> flange on the 61 SO and 71 SO overfill <br /> prevention valve . The 61 SO and 71 SO <br /> t1 -- series valves are installed in the base of <br /> the OPW EVR spill container with the <br /> Y <br /> �, patent- pending 61 JSK Jack Screw device.SVR This configuration allows liquid in the <br /> spill container to be drained directly into <br /> 1DK n Valve <br /> Faded Riser <br /> 61 JSK 71 JSK the drop tube thereby isolating the drain <br /> Drain Valve Threaded Riser lack Screw Jack Screw <br /> Adaptor USA Patent No. 6, 523, 581 E85EVR Approved valve from the tank ullage, eliminating a <br /> OPW Threaded Riser Adaptor ( Face Seal Adaptor) notorious leak point in previous systems. <br /> An OPW FSA-400 Threaded Riser Face Seal Adaptor provides a flat, true sealing <br /> surface on threaded pipes where a gasket seal exists per EVR requirements. The FSA- <br /> 400 is installed on the fill pipe riser below the spill container to provide a true sealing <br /> surface for the drop tube flange on the overfill prevention valves. The FSA-400 is also <br /> required on tank gauging risers and optional on vapor risers and rotatable adaptors . <br /> 61JSK, 71JSK (Jack Screw Device) <br /> Ordering Specifications <br /> Product # Description <br /> FSA-400 4 " Face Seal Adaptor <br /> FSA-400-S 4 " Short Face Seal Adaptor for Cast Iron Base Only <br /> 61 JSK-4410 Jack Screw Kit for Composite Base Spill Bucket <br /> 61JSK-44CB Jack Screw Kit for Cast Iron Base Spill Bucket <br /> 71 JSK-4RMT Remote Fueling Jack Screw Kit E85 EVR Approved <br /> 71 JSK-44MA Jack Screw Kit for Cast Iron Base Spill Buckets E85 EVR Approved <br />