COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

Certificate Number:02-019A24 Page 14 of 19 Gilbarco,Inc. Retail Motor Fuel Dispenser(RMFD)/Nxx Series NCWM Publication 14. The manufacturer requested additional testing with up to E25 to align with UL87A 5t' edition and in anticipation of EPA changing the ethanol content for "standard" gasoline. Each meter was evaluated with gasoline containing 25% ethanol (E25) as the test fluid. Accuracy testing was done at 3 flow rates for both the initial and subsequent test. The T19976-G3 meter was evaluated after having dispensed gallons 43,663 gallons of E25,followed by 46,592 gallons of gasoline followed by 17,687 gallons of E25 with a total throughput of 107,942 gallons. The T19976-V3 meter was evaluated after having dispensed gallons 44,004 gallons of E25, followed by 46,598 gallons of gasoline followed by 17,677 gallons of E25 with a total throughput 108,279 gallons. The manufacturer stated that switching from E25 then to gasoline and then back to E25 represented the worst case testing for the meters. No changes were made to the standard T19976-G3 and T19976-V3 meters. Because these are the same models as previously evaluated with no internal or external differences,photos of the meter in the manufacturer's equipment was not provided. The device evaluation was based on the 2010 edition of NIST Handbook 44 and NCWM Publication 14. The device complies with applicable requirements. Model NBO and references to the use of the Murray model 989 meters is being removed from the certificate at the manufacturer's request. This model and meter were never placed into production and will not be used. Certificate of Conformance Number 02-019A15: This certificate supersedes Certificate of Conformance number 02-019A14 and is issued noting the addition of a new Gilbarco meter model T19976-V3.This meter is the same as the manufacturers T19976 G1 and G2 with a new piston and meter end cap as CC No. 02-038A4. Testing was conducted at the manufactures test facility using a Gilbarco Encore series dispenser with the T19976-V3 meters installed. The 2009 edition of NCWM Publication 14 was the basis for the evaluation. The meter was evaluated with gasoline and diesel as the test fluids.Accuracy testing was done at 3 flow rates for both the initial and subsequent test. Each meter was retested after having dispensed 22290 gallons of gasoline and 20465 gallons of diesel. Other than the model number on the meter,no external differences are notable and photo of the meter in the manufacturer's equipment was not provided. Certificate of Conformance Number 02-019A14: This certificate supersedes Certificate of Conformance number 02-019A13 and is issued noting a new Gilbarco pulser, Model: M09040xxxx for Encore 500 and Model: M09261xxxx for Encore 300. The dispenser with the new pulser was evaluated and tested at the manufacturer's facility using the 2008 edition of NCWM Publication 14 as the basis for the evaluation.Accuracy testing was done at 3 flow rates.Subsequent testing was not deemed necessary. Certificate of Conformance Number 02-019A13: This certificate supersedes Certificate of Conformance number 02-019Al2 and is issued noting a change in the minimal flow rate of the Gilbarco Model T19976 Gx meter series.No changes were made to the T19796 Gx series meters.A change in the meter minimum flow rate is needed to meet new customer demands. The meter was placed into the manufacturer's Encore series dispenser for testing. The dispenser with the T19976 Gx meters was evaluated and tested at the manufacturer's facility using the 2008 edition of NCWM Publication 14 as the basis for the evaluation. E100 (100% ethanol) and "Worthpar7"as a 100%biodiesel equivalent(10 centipoises)were used as the test fluids.Accuracy testing was done at 3 flow rates for both the initial and subsequent test. Each meter (2 meters tested) was retested after having dispensed 20,002 gallons of E100 and 20,108 gallons of Worthpar7(B 100). Additionally, meters models M02950, T20453-GX and the Murray 989 meters were removed from the list of options. The manufacturer no longer offers these models. Models numbers:NB 1,NB2,NB3,NB4,NFO,NF1,NF2,NMO,NMI,NM2, and NM3 were removed from the model code list(page3)and were never offered by the manufacturer. The name of the M07300 series meters changed from E-meter to Ecometer. Certificate of Conformance Number 02-019Al2: This certificate supersedes Certificate of Conformance number 02-019A1 I and is issued to add:FlintLoc Security System,Encrypted Card reader,Encrypted PIN pad and to document changes to the Audit trail. Flintloc device is not manufactured by Gilbarco.The FlintLoc System may be added to existing units or may be provide on the unit by Gilbarco. The system will require the use of a special remote "key"to deactivate the system. Opening the electronics cabinet without first deactivating the security device will trigger an audible alarm and flashing light. The device does not have any metrological features. Encrypted PIN pad and Encrypted Card Reader-The credit card industry is mandating that information from a credit/debit card and from the PIN pad be encrypted to reduce fraud. The encrypted data is then sent to the card company and the transaction proceeds as a Normal credit/debit card.The use of the encrypted data does not affect the metrological function of the dispenser.The Encrypted PIN