COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

:r0�µco_n, Certificate Number:02-019A24 P Page 15 of 19 z p e W 2 W 5g 5' AND ANO Gilbarco,Inc. Retail Motor Fuel Dispenser(RMFD)/Nxx Series Pad and Encrypted Card Reader was evaluated and tested at the manufacturer's facility using the 2007 edition of NCWM Publication 14 as the basis for the evaluation. Audit trail information has been updated noting that supplemental information is shown on the audit trail screens on units with software versions greater than 01.8.00. All of the original information is still present with new supplemental information shown. Additional information is included to facilitate the use the audit trail as requested by W&M field officials. The new format for the Audit trail information was evaluated at the manufacturer's facility using the 2007 edition of NCWM Publication 14 as the basis for the evaluation. Certificate of Conformance Number 02-019A11: This certificate supersedes Certificate of Conformance number 02-019A10 and is issued to add M07300A001, M0730OA002 and M0730OA003 Eco meters. (Reference CoC 02-040A2) The M0730OA001 meter will supersedes and replace the original T20453-Gx part number. The new models are M0730OA001 with a cast iron body, (original T20453Gx). The M0730OA002 approved in CoC 02-04OAl has a stainless steel body and the M0730OA003 has a aluminum body.All internal components are unchanged. The M0730OA003 with an aluminum body was tested with gasoline and then diesel fuel. This meter was placed in the manufacturers Encore series dispenser (cc 02-019A 10). The Encore series dispenser with the Meter was connected was evaluated and tested at the manufacturer's facility using the 2007 edition of NCWM Publication 14 as the basis for the evaluation. Accuracy testing was done a 3 flow rates for both the initial and subsequent test. Each meter was retested after having dispensed 20,591 gallons gasoline and 20,212 gallons of diesel. Certificate of Conformance Number 02-019A10: This certificate supersedes Certificate of Conformance number 02-019A9 and is issued to add four additional models to the Encore series:Model NP6 a Ultra-hi dual master single sided unit;model NP8,a Ultra-hi dual satellite single sided; Model NG6 a single hose blender with 2 additional single grade products i.e. 3+1+1 blender and model NL8 a single hose blender with 2 additional single products i.e.a 3+1+1 blender. These are the same as the manufactures Model NP3 and NP5 except for being single sided.Models NG6 and NL8 are additions to the model family adding an additional single hose to the 3+1 series.Referred to as 3+1+1.All components,electronics,meters are the same as used in models NP3 and NP5.No metrological changes were made.No additional testing was deemed necessary. It is noted that the"S"series bezel door(CoC 02-019A6)is provided with indicator lights over each grade select switch.Lifting a hose or lifting of a hose and hose lever activates the indicator light associated with hose.Example lifting the hose for diesel illuminates the light for the diesel grade selection switch. While this feature is not required it is included by the manufacturer to minimize the selection of the wrong grade by the customer.The Lighting feature for the"S"series bezel is called"Progressive Lighting." Certificate of Conformance Number 02-019A9: This certificate supersedes Certificate of Conformance number 02-019A8 and is issued to add alternate fuels such as E100 (100%ethanol),E85(gasoline with 85%ethanol),and 13100 biodiesel(100%biodiesel)or any biodiesel blend greater that 20%. The alternate fuel dispenser uses a Gilbarco T19976 G5 meter. The meter located in the dispenser's hydraulic cabinet and is electronically calibrated.The dispenser with the T19976 G5 meter and console were evaluated and tested at the manufacturer's facility using the 2007 edition of NCWM Publication 14 as the basis for the evaluation. Gasoline,Diesel, E100(100%ethanol)and"Worthpar7" (10 centipoise)as 100%biodiesel were used as the test fluids.Accuracy testing was done at 3 flow rates for both the initial and subsequent test. Each meter was retested after a minimum of 20 days use and having dispensed 25356 gallons of gasoline,25377 gallons of diesel,25359 gallons of E100 and 25547 gallons of Worthpar7(13100). Certificate of Conformance Number 02-019AS: This certificate supersedes Certificate of Conformance number 02-019A7 and is issued to add an alternate meter, the Gilbarco E-Meter M07300xx(cc 02-040.A1). The meter located in the dispenser's side column does not have any adjustable or metrological calibration features. The meter does not contain any field serviceable components. The meter is provided with a factory installed,tamper evident decaUseal containing the Gilbarco Inc.name,Trademark or logo,and a non- repetitive serial number. Destruction or absence of the tamper evident seal indicates that the meter's internal mechanisms have been accessed. While the meter does not have any adjustable or metrological calibration features,the inspector should verify that access to the meter's internal mechanisms has not altered the metrological integrity of the device. The dispenser with the E-Meter meter and console were evaluated and tested at the manufacturer's facility using the 2007 edition of NCWM Publication 14 as the basis for the evaluation. Gasoline and Diesel were used as the test fluids. Accuracy testing was done at 3 flow rates for both the initial and subsequent test. Each meter was retested after a minimum of 22 days use and having dispensed 21723 gallons gasoline and 22233 gallons of diesel.