Laserfiche WebLink
Introduction Before You Begin <br /> Before You Begin <br /> Before you begin component replacement, read the following guidelines: <br /> • To avoid electrical shock, be sure AC power to the console is Off when performing the procedures in this <br /> manual. <br /> • Failure to comply with these requirements could result in death,serious personal injury, property loss,or <br /> equipment damage. <br /> Safety Precautions <br /> The following safety symbols may be used throughout this manual to alert you to important safety hazards and <br /> precautions. <br /> ELECTRICITY TURN POWER OFF <br /> High voltage exists in,and is supplied Live power to a device creates a <br /> to,the device.A potential shock hazard potential shock hazard.Turn Off power <br /> O exists. to the device and associated accesso- <br /> ries when servicing the unit. <br /> INJURY STATIC SENSITIVE COMPONENTS <br /> Careless or improper handling of tools Wear grounded anti-static wrist strap <br /> can cause bodily injury. before handling the printed circuit <br /> board. <br /> WARNING READ ALL RELATED MANUALS <br /> Heed the adjacent instructions to avoid Knowledge of all related procedures <br /> ' damage to equipment,property,envi- before you begin work is important. <br /> ronment or personal injury. O Read and understand all manuals thor- <br /> • oughly.If you do not understand a pro- <br /> cedure,ask someone who does <br /> A WARNING <br /> This system operates on 115 Vac power.Serious injury or death from electrical <br /> _ shock could occur if the power ON/OFF warnings in this manual are not <br /> heeded. <br /> FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY <br /> PRECAUTIONS COULD CAUSE DAMAGE TO PROPERTY,ENVIRONMENT, <br /> RESULTING IN SERIOUS INJURY OR DEATH. <br /> 1. Read and follow all instructions in this manual,including all safety <br /> warnings. <br /> 2. Remove rings from hands,metal watch bands and bracelets,and loose <br /> hanging neck jewelry before performing these procedures. <br /> 3. Do not modify or use service parts other than those provided by Veeder- <br /> Root <br /> 2 <br />