Laserfiche WebLink
Introduction Precautions Against Static Electricity <br /> Precautions Against Static Electricity <br /> Before removing electronic components from their antistatic bags read the following static electricity precautions. <br /> 1. Before handling any components, discharge your body's static electric charge by touching a grounded <br /> surface. <br /> 2. Do not remove parts from their antistatic bags until you are ready to install them. <br /> 3. Do not lay parts on the antistatic bags! Only the insides are antistatic. <br /> 4. When handling parts, hold them by their edges and their metal mounting brackets. <br /> 5. Avoid touching components or edge connectors that plug into slots. <br /> 6. Never slide parts over any surface. <br /> 7. Avoid plastic,vinyl,and styrofoam in your work area. <br /> 8. Wear the antistatic wrist strap included in your component replacement kit. <br /> 9. The antistatic caution icon shown to the left appears in several places in this manual to remind you to wear an <br /> antistatic wrist strap (Part No. 576013-908)when handling static sensitive devices. <br /> Before Turning Off Power - All Procedures <br /> 1. If you have a printer and it is usable,from the Operations Mode press the PRINT key to print out a copy of the <br /> system status [active alarms(if any),and in-tank inventory]. <br /> 2. From the Setup Mode press the PRINT key to print out a copy of the system setup. <br /> 3. From the Diagnostic Mode press FUNCTION then PRINT for each of the Diagnostic Mode functions to print <br /> out copies of all of the system diagnostic reports. <br /> 3 <br />