Laserfiche WebLink
Performing a Cold : . . <br /> IMPORTANT! All operating,setup and historical data will be lost, including data on the NVMEM card <br /> if applicable,when the TLS console is cold booted. <br /> 1. Push the Battery Backup switch (SWI) down to the OFF position (ref.step 4 in Figure 7). <br /> 2. Restore AC power to the console.The console front panel display will cycle through the following screens: <br /> CLEARING ALL RAM <br /> SYSTEM COLD START <br /> SYSTEM SELF TEST <br /> SYSTEM STARTUP COMPLETE <br /> Wait until the printer prints: <br /> *** SYSTEM RESET *** <br /> MMM DD, YYYY HH:MM XM <br /> and the front panel display reads: <br /> MMM DD,YYYY HH:MM:SS XM <br /> RESTORE SETUP DATA: NO <br /> 3. Push the Battery Backup switch (SW1) up to the ON position. <br /> 4. Press the CHANGE key: <br /> MMM DD,YYYY HH:MM:SS XM <br /> RESTORE SETUP DATA:YES <br /> 5. Press the ENTER key: <br /> RESTORE SETUP DATA: YES <br /> PRESS<STEP>TO CONTINUE <br /> 6. Press the STEP key and the printer prints: <br /> ARCHIVE UTILITY <br /> RESTORE SETUP DATA <br /> START TIME: <br /> MMM DD, YYYY HH:MM XM <br /> 12 <br />