Laserfiche WebLink
SmSeries Simplex Control Panels <br />Applications <br />Crenco® S -Series Simplex Control Panels control single pumps in <br />effluent sewer (STEP) systems, onsite septic systems, and for pump <br />control into conventional gravity sewer systems. <br />Orenco S -Series Simplex Control Panel (SIETMCT shown) <br />Materials of Construction <br />AR <br />Component <br />Material <br />Enclosure <br />UV -resistant fiberglass, Type 4X (IP 66) <br />Hinge <br />Stainless steel <br />Latch <br />Stainless steel <br />Specifications <br />Feature <br />Specifications <br />Height, in. (mm) <br />11.5 (292) <br />Width, in. (mm) <br />9.3(236) <br />Depth, in. (mm) <br />5.4(137) <br />S1 panel ratings" <br />120 VAC,1 hp (0.75 k", 16 A,1 -phase, 60 Hz <br />S2 panel ratings' <br />240 VAC, 3 hp (2.24 k" 16 A,1 -phase, 60 Hz <br />Pump motors used with these panels require internal overload protection <br />General <br />Orenco° S -Series Simplex Control Panels are electromechanical <br />panels for controlling single pumps. Standard features include an <br />Automatic/Off/Manual (Auto/Off/Man) toggle switch, controls circuit <br />breaker, pump circuit breaker, automatic motor control operation, and <br />an audible/visible high water level alarm with auto reset. Specifications <br />for standard and optional features are listed on page 2. <br />All S -Series control panels have a 120 VAC controls circuit <br />breaker. S1 panels have a 120 VAC pump circuit breaker, <br />while S2 panels have a 240 VAC pump circuit breaker. <br />All S -Series panels can be used with both mechanical and <br />mercury float switches. <br />Listed per UL -508 and cUL-508; CE -listed versions of S -Series <br />panels are available, <br />Standard Models <br />S1, S2 <br />Product Code Diagram <br />S <br />Standard options (list in order): <br />PT = programmable timer <br />RO = redundant off relay <br />DS = disconnect switch <br />ETM = elapsed time meter <br />CT = event counter <br />HT = heater <br />PRL = pump run light <br />PL = power light <br />SA = surge arrestor <br />Intrinsically safe relays: <br />Blank = standard, no IR relays <br />IR1 = up to 2 float switches <br />I132 = up to 4 float switches <br />Pump voltage: <br />1 =120 VAC <br />Y— 2 = 120 VAC or 240 VAC <br />S Series simplex control panel <br />Orenco Systems® Inc. , 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-4594449 • www.orenco.com NTD -CP -S-1 <br />Rev. 2.0, ® 03117 <br />Page 1 of 2 <br />