Laserfiche WebLink
e <br /> a <br /> 3.08 PROTECTIVE WELL ENCLOSURE INSTALLATION <br /> A. Install the protective well enclosure ("can") according to the spacing <br /> specified in the design drawings. <br /> B. Brace "can" plumb during concrete placement, until set. <br /> C Inscribe the concrete base of the can with the designation of the well as <br /> shown on the plans. Inscription shall be neat and professional in <br /> appearance. <br /> D. Install carriage bolt in wet concrete per the direction of the Engineer as <br /> shown on the drawings. Carriage bolt shall be zinc or cadmium plated. <br /> E. Once the concrete base of the protective well enclosure has hardened, pour <br /> cement slurry inside the protective enclosure to the finish grade level of the <br /> concrete base in the presence of the Engineer. When pouring cement <br /> slurry inside the enclosure, protect probes from contact with cement slurry. <br /> F. Drill a weep hole into the can at the finished cement slurry grade level <br /> inside the can. <br /> G. Fabricate enclosure cover per the design drawings. The enclosure lid shall <br /> open and close smoothly. Any enclosure not installed per the construction <br /> drawings and its cover not functional to the satisfaction of the Engineer will <br /> be rejected. <br /> 3.09 BOLLARDS <br /> A Install steel post bollards as shown on the drawings at specified well. <br /> B Remove wet concrete from the outside surface of the bollard after overfilling <br /> the steel pipe with cement. <br /> 3.10 LABELING <br /> A. Label the well can with the well number using yellow or white paint, <br /> indicating the well designation as shown on the Plans. Labeling shall be by <br /> oil based paint with brush, in a neat and professional manner. <br /> 3.11 FINISHED GRADE RESTORATION <br /> A. Restore areas disturbed by work to approximate conditions. Work shall be <br /> considered complete when all construction materials, debris, and <br /> Soil Gas Monitoring Well Specs San Joaquin County-Public Works <br /> Foothill Sanitary Landfill& 10 Solid Waste Division <br /> Corral Hollow Sanitary Landfill Printed 10/10/2007 <br />