CORRESPONDENCE_1972-1986 - Laserfiche WebLink

Home Browse Search

Mr. Henry Hirata -2- 22 February 1985 2) Dischargers who own or operate existing waste management units for which waste discharge requirements were issued before the effective date of this subchapter shall submit a report of waste discharge which complies with Subsection (a) of this section to the regional board, together with the appropriate filing fee, on request. Any applicable information required by Sections 2594 through 2597 of this article which has been submitted to the regional board, or another state agency, may be incorporated by reference, provided that the report shall not be considered complete until referenced information is received or obtained by the regional board." You must comply with all the Subchapter 15 regulations applicable to "existing waste management units" as defined in Subchapter 15. Specifically, compliance with Article 4 (as feasible), Article 5, and Article 8 must be met. The Report of Waste Discharge referenced in Subsection 2590(b)(2) must comply with Article 9. The technical report referenced in Subsection 2590(b)(1) shall be prepared accord- ing to Subsection 2596(a)(3), which states: "Dischargers shall submit detailed plans and equipment specifications for compliance with the ground water and unsaturated zone monitoring require- ments of Article 5 of this subchapter. Dischargers shall provide a tech- nical report which includes rationale for the spatial distribution of ground water and unsaturated zone monitoring facilities, for the design of monitoring points, and for the selection of other monitoring equipment. This report shall be accompanied by: A) a map showing the locations of proposed monitoring facilities; and B) drawings and data showing construction details of proposed monitoring facilities. These data shall include: (i) casing and test hole diameter; (ii) casing materials (PVC, stainless steel , etc.) ; (iii) depth of each test hole; (iv) size and position of perforations; (v) method of joining sections of casing; (vi) nature of filter material ; (vii) depth and composition of seals; (viii) method and length of time of development; C) specifications, drawings, and data for location and installation of unsaturated zone monitoring equipment." In order to comply with both your Waste Discharge Requirements and the revised Subchapter 15 regulations now in effect, we request that you submit a Report of Waste Discharge and a technical plan as specified above.