COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

JSA 15: GROUNDWATER EXTRACTION AND/OR SVE SYSTEM INSTALLATION March 30, 2010 Field staff must review job-specific work plan and coordinate with project manager to verify that all up-front logistics are completed prior to starting work including, but not limited to, permitting, access agreements, and notification to required contacts (e.g. site managers, inspectors, clients, subcontractors, etc.). A tailgate safety meeting must be performed and documented at the be•innin. 0 Job Steps of each work da . Weather conditions heat, 0 Personal Protective Equipment cold, rain, li.htnint must also be 0 Potential Hazard considered. 0 Critical Actions Mobilize with proper equipment/supplies for trenching. Gather necessary PPE. Reflective vest for traffic, steel toed and shank shoes, hard hat, safety glasses with side shields, ear plugs/muffs, leather gloves for the non- chemical aspects of work as necessary; Wear an appropriate air purifying respirator with combination organic vapor/HEPA P-100 cartridges, and other PPE as needed. (Use a North respirator or its equivalent. Best brand nitrile gloves or their equivalent. Foam earplugs with an NRR of 33. Tyvek, poly coated chemical resistant suit or its equivalent). Traffic hazards. Vehicle accident. Lifting hazards. Delay or improper performance of work due to improper equipment on site. Start project with a Daily Health and Safety Briefing. Follow safe driving procedures. Employ safe lifting procedures. Make sure sub-contractors are aware of their responsibilities for labor, equipment and supplies. Review permit conditions. Develop a traffic control plan with the client and/or local agencies as applicable. Plan may include use of cones, barrier tape, jersey barriers, etc. (Include in site-specific HASP). It is the responsibility of the SHSO to annotate the Site Plan with the Traffic Control configuration if an Approved Traffic Control Plan is not available. Visually clear the proposed trenching and above-ground structure locations. Mark out the proposed trenching locations. Wear reflective vest for traffic, steel toed and shank shoes, hardhat, safety glasses with side shields, and leather gloves as necessary. Traffic hazards. Overhead and underground lines & installations, Electrocution, explosion, product release, property damage, interruption of services. Review proposed location map in advance of arriving on site. Complete Pre-Mobilization section of Utility Clearance Review form and adjust drilling locations as necessary. Coordinate with Station Manger (or designee) to minimize potential conflicts. Set up necessary traffic control, if necessary. See site-specific HASP for detailed plan if available. Wear reflective vest for traffic, steel toed and shank shoes, hardhat, safety glasses with side shields, and leather gloves as necessary. Struck by vehicle during placement. Vehicle accident as a result of improper traffic control equipment placement. Use buddy system for placing traffic control. Implement traffic control plan such as setting out cones and tape defining safety area. Adhere to approved Traffic Control Plans when working in roadways. (See site-specific HASP). It is the responsibility of the SHSO to annotate the Site Plan with the Traffic Control configuration if an Approved Traffic Control Plan is not available. Set up exclusion zone(s). Wear reflective vest for traffic, steel toed and shank shoes, hardhat, safety glasses with side shields, and leather gloves as necessary. Struck by vehicle during set up. Slip/fall hazards. Implement exclusion zone. It is the responsibility of the SHSO to annotate the Site Plan with the Exclusion Zone set-up. Set up workstations with clear walking paths to and from trenching. Use safety tape and cones. Cut pavement. Wear reflective vest for traffic, steel toed and shank shoes, hardhat, safety_glasses Traffic hazard. Identify and barricade work area. Paper copies are uncontrolled and are valid only at the time of printing. The electronic version may he downloaded from SGI's intranet. Page 1 of 4 The Source Group, Inc.