Laserfiche WebLink
Proiect Number 2098RV45 November 30 2017 <br /> Remediation will be the Project Manager and serve as the Site Safety Officer (SSO). As <br /> SSO, Mr. Xu will distribute copies of the SSP to on-site personnel. Personnel will be <br /> required to document their full understanding of the SSP before admission to the site. <br /> Compliance with the SSP will be monitored at all times by the SSO. Appropriate <br /> personnel will conduct a training session to assure that all are aware of safe work <br /> practices. In the training session, personnel will be made aware of hazards at the site <br /> and will utilize Material Safety Data Sheets for information on compounds to be <br /> encountered. <br /> Mr. Xu will also be responsible to verify that field personnel keep proper field notes, <br /> collect and secure samples, and assure sample integrity by adherence to Chain-of- <br /> Custody protocol. <br /> On-site employees will take reasonable precautions to avoid unforeseen hazards. <br /> After documenting understanding of the SSP, each on-site employee will be <br /> responsible for strict adherence to all points contained herein. Any deviation <br /> observed will be reported to the SSO and corrected. On-site employees are held <br /> responsible to perform only those tasks for which they believe they are qualified. <br /> Provisions of this SSP are mandatory and personnel associated with on-site activities <br /> will adhere strictly hereto. <br /> Job Hazard Analysis: <br /> Hazards likely to be encountered on site include those commonly encountered when <br /> operating any mechanical equipment, such as the danger of falling objects or moving <br /> machinery and potential excessive noise. Simple precautions will reduce or eliminate <br /> risks associated with operating such equipment. Noise control will comply with local <br /> ordinances and personnel will wear ear plugs and/or other hearting protection when <br /> working adjacent (within 3 feet) to the system. <br /> Qualified personnel only will have any contact with this equipment. All on-site <br /> personnel, including the drilling contractor and his employees, are required to wear <br /> hard hats and steel-toed shoes when in close proximity to drilling equipment. Latex <br /> gloves will be worn by persons collecting or handling samples to prevent exposure to <br /> contaminants. Gloves will be changed between samples, and used ones discarded, to <br /> avoid cross-contamination. Proper respiratory equipment will be worn if vapor <br /> contamination levels on site exceed action levels as determined using a PID or FID. <br /> Action levels requiring respiratory apparatus will be 5 ppm, in the breathing space. <br /> Furthermore, no on-site smoking, open flame, or sparks will be permitted in order to <br /> prevent accidental ignition. <br /> E2C Remediation B-2 <br />