|
PLUMBING PLUMBING PLUMBING PLUMBING
<br /> ..
<br /> SECTION 220516-EXPANSION FITTINGS AND LOOPS FOR PLUMBING PIPING SECTION 220529-HANGERS AND SUPPORTS FOR PLUMBING PIPING SECTION 221116-DOMESTIC WATER PIPING SECTION 221119-DOMESTIC WATER PIPING SPECIALTIES
<br /> 1.1 REQUIREMENTS 1.1 COMPONENTS 1.1 INFORMATIONAL SUBMITTALS QUALITY ASSURANCE
<br /> A. PROVIDE FOR EXPANSION OF PLUMBING PIPING IN ACCORDANCE WITH INDUSTRY A. METAL PIPE HANGERS AND SUPPORTS: FACTORY FABRICATED WITH GALVANIZED A. SYSTEM PURGING AND DISINFECTING ACTIVITIES REPORT. QUALITY STANDARDS: NSF 14 AND NSF 61. ..
<br /> STANDARDS AND GOOD INSTALLATION PRACTICES. COATING, NON-METALLIC COATED FOR HANGERS IN DIRECT CONTACT WITH COPPER B. FIELD QUALITY-CONTROL REPORTS.
<br /> TUBING. PRODUCTS
<br /> END OF SECTION 220516 B. THERMAL-HANGER SHIELD INSERTS:ASTM C 552,TYPE II CELLULAR GLASS. 1.2 FIELD CONDITIONS VACUUM BREAKERS:
<br /> C. FASTENER SYSTEMS:POWDER-ACTUATED FASTENERS AND A. INTERRUPTION OF EXISTING WATER SERVICE: DO NOT INTERRUPT WATER 1. PIPE-APPLIED,ATMOSPHERIC-TYPE VACUUM BREAKERS:ROUGH-BRONZE OR
<br /> MECHANICAL-EXPANSION ANCHORS. SERVICE TO FACILITIES OCCUPIED BY OWNER OR OTHERS UNLESS PERMITTED CHROME-PLATED FINISH.
<br /> D. PIPE POSITIONING SYSTEMS: IAPMO PS 42, POSITIONING SYSTEM OF METAL BRACKETS, UNDER THE FOLLOWING CONDITIONS AND THEN ONLY AFTER ARRANGING TO 2. AIR-GAP FITTING:ASME Al 12.1.2, MATCHING BACKFLOW-PREVENTER CONNECTION.
<br /> CLIPS,AND STRAPS. PROVIDE TEMPORARY WATER SERVICE ACCORDING TO REQUIREMENTS 3. HOSE-CONNECTION VACUUM BREAKERS:CHROME-OR NICKEL-PLATED OR
<br /> PLUMBING E. SUPPORTS FOR PEX PIPING SHALL BE MANUFACTURER APPROVED. INDICATED: ROUGH-BRONZE FINISH.
<br /> F. COMPLY WITH ANSI/MSS SP-69 PIPE HANGERS AND SUPPORTS, SELECTION& 1. NOTIFY CONSTRUCTION MANAGER NO FEWER THAN TWO DAYS IN 4. PRESSURE VACUUM BREAKERS. ©2017STARBUCKS COFFEE COMPANY
<br /> SECTION 220517-SLEEVES AND SLEEVE SEALS FOR PLUMBING PIPING APPLICATIONS. ADVANCE OF PROPOSED INTERRUPTION OF WATER SERVICE. BACKFLOW PREVENTERS:
<br /> 1.1 SLEEVE-SEAL SYSTEMS 2. DO NOT INTERRUPT WATER SERVICE WITHOUT CONSTRUCTION MANAGER'S 1. REDUCED-PRESSURE-PRINCIPLE BACKFLOW PREVENTERS:
<br /> AR SEALING-ELEMENT UNIT FOR FILLING ANNULAR SPACE END OF SECTION 220529 WRITTEN PERMISSION. a. BODY: BRONZE FOR NPS 2 AND SMALLER.
<br /> BETWEEN PIPING AND SLEEVE. b. END CONNECTIONS:THREADED FOR NPS 2 AND SMALLER. STARBUCKS COFFEE
<br /> 1. SEALING ELEMENTS: EPDM RUBBER OR NBR. 1.3 PIPING MATERIALS c. CONFIGURATION:HORIZONTAL-STRAIGHT THROUGH,VERTICAL INLET,
<br /> 2. PRESSURE PLATES:CARBON STEEL, PLASTIC OR STAINLESS STEEL. A. POTABLE-WATER PIPING AND COMPONENTS SHALL COMPLY WITH NSF 14 AND HORIZONTAL CENTER SECTION,AND VERTICAL OUTLET OR VERTICAL. COMPANY
<br /> 3. CONNECTING BOLTS AND NUTS:CARBON STEEL WITH CORROSION-RESISTANTPLUMBING NSF 61 NSF NEX G. PLASTIC PIPING COMPONENTS SHALL BE MARKED WITH 2. Cl. LEAD FREE. 2401 UTAH AVENUE SO
<br /> DOUBLE-CHECK BACKFLOW-PREVENTION ASSEMBLIES: SEATTLE, WASHINGTON UTH
<br /> COATING OR STAINLESS STEL. 98134
<br /> a. BODY: BRONZE FOR NPS 2 AND SMALLER. (206)318-1575
<br /> 1.2 SLEEVE-SEAL FITTINGS SECTION 220553-IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT 1.4 UNDER-BUILDING-SLAB, DOMESTIC WATER, BUILDING SERVICE PIPING b. END CONNECTIONS:THREADED FOR NPS 2 AND SMALLER.
<br /> A. MANUFACTURED PLASTIC, SLEEVE-TYPE, PLASTIC OR RUBBER WATERSTOP ASSEMBLY 1.1 PRODUCTS A. PIPE NPS 3 AND SMALLER: c. CONFIGURATION:HORIZONTAL, STRAIGHT THROUGH THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> MADE FOR IMBEDDING IN CONCRETE SLAB OR WALL. A. EQUIPMENT LABELSWETAL OR PLASTIC. 1. SOFT COPPER TUBE;WROUGHT-COPPER;AND BRAZED JOINTS. Cl. LEAD FREE.
<br /> 2. OTHER APPROVED PIPING WHEN SOIL IS CORROSIVE. 3. HOSE-CONNECTION BACKFLOW PREVENTERS. CONFIDENTIAL AND SHALL REMAIN THE SOLE
<br /> B. WARNING SIGNS AND LABELS: 1/16 INCH (1.6 MM)ORI/8 INCH (3.2 MM) PROPERTY OF STARBUCKS CORPORATION,
<br /> 1.3 GROUT THICK AND NOT LESS THAN 2-1/2 BY 3/4 INCH (64 BY 19 MM)SIZE 3. PROVIDE TRACE WIRE FOR ALL PLASTIC UNDERGROUND PIPING SO THAT WATER PRESSURE-REDUCING VALVES:
<br /> A. NONSHRINK, FACTORY PACKAGED. WITH FASTENERS OR ADHESIVE LETTER SIZE NOT LESS THAN 1/4 INCH (6.4 MM)FOR UNDERGROUND PIPING MAY BE LOCATED IN THE FUTURE. TRACE WIRE: 1. WATER REGULATORS: WHICH IS THE OWNER OF THE COPYRIGHT IN
<br /> NAME OF UNITS IF VIEWING DISTANCE IS LESS THAN 24 INCHES(600 MM), 1/2 INCH NO. 12, COPPER 600 V.THHN INSULATION. a. BODY: BRONZE FOR NPS 2 AND SMALLER. THIS WORK. THEY SHALL NOT BE
<br /> 1.4 SLEEVE AND SLEEVE-SEAL SCHEDULE (13 MM)FOR VIEWING DISTANCES UP TO 72 INCHES(1830 MM),AND PROPORTIONATELY b. VALVES FOR BOOSTER HEATER WATER SUPPLY: INCLUDE INTEGRAL BYPASS. REPRODUCED(IN WHOLE OR IN PART), SHARED
<br /> A. EXTERIOR CONCRETE WALLS ABOVE GRADE: LARGER LETTERING FOR GREATER VIEWING DISTANCES. INCLUDE SECONDARY 1.5 UNDER-BUILDING-SLAB, DOMESTIC WATER PIPING c. END CONNECTIONS:THREADED FOR NPS 2 AND SMALLER WITH THIRD PARTIES OR USED IN ANY MANNER
<br /> 1. PIPING SMALLER THAN NPS 6 :CAST-IRON WALL SLEEVES, LETTERING TWO-THIRDS TO THREE-QUARTERS THE SIZE OF PRINCIPAL LETTERING. A. PIPE NPS 2 AND SMALLER: TEMPERATURE-ACTUATED WATER MIXING VALVES: ON OTHER PROJECTS OR EXTENSIONS TO THIS
<br /> GALVANIZED-STEEL WALL SLEEVES OR GALVANIZED-STEEL-PIPE SLEEVES. C. PIPE LABELS: PRETENSIONED OR SELF-ADHESIVE. LETTER SIZE NOT LESS THAN 1. HARD OR SOFT COPPER TUBE; WROUGHT-COPPER;AND BRAZED JOINTS. 1. WATER-TEMPERATURE LIMITING DEVICES: PROJECT WITHOUT THE PRIOR WRITTEN
<br /> SLEEVE-SEAL FITTINGS. 1/2 INCH (13 MM)FOR VIEWING DISTANCES UP TO 72 INCHES(1830 MM)AND 2. OTHER APPROVED PIPING WHEN SOIL IS CORROSIVE. a. CONNECTIONS:THREADED UNION INLETS AND OUTLET. CONSENT OF STARBUCKS CORPORATION.
<br /> B. EXTERIOR CONCRETE WALLS BELOW GRADE: PROPORTIONATELY LARGER LETTERING FOR GREATER VIEWING DISTANCES. 3. PROVIDE TRACE WIRE FOR ALL PLASTIC UNDERGROUND PIPING SO THAT b. FINISH: CHROME PLATED OR ROUGH BRONZE THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> 1. PIPING SMALLER THAN NPS 6 :CAST-IRON WALL SLEEVES WITH D. STENCILS: ALUMINUM, BRASS, FIBERBOARD, FIBERBOARD OR METAL. UNDERGROUND PIPING MAY BE LOCATED IN THE FUTURE. TRACE WIRE: 2. PRIMARY,THERMOSTATIC, WATER MIXING VALVES: INTENDED TO EXPRESS DESIGN INTENT FOR A
<br /> SLEEVE-SEAL SYSTEM, GALVANIZED-STEEL WALL SLEEVES WITH SLEEVE-SEAL LETTER SIZE NOT LESS THAN 1/2 INCH (13 MM) FOR VIEWING NO. 12, COPPER 600 V.THHN INSULATION. a. TYPE:EXPOSED MOUNTED OR CABINET TYPE PROTOTYPICAL STARBUCKS STORE (WHICH IS
<br /> SYSTEM,GALVAN IZED-STEEL-P I PE SLEEVES WITH SLEEVE-SEAL SYSTEM OR DISTANCES UP TO 72 INCHES(1830 MM)AND PROPORTIONATELY LARGER LETTERING b. CONNECTIONS:THREADED OR UNIONINLETS AND OUTLET. SUBJECT TO CHANGE AT ANYTIME)AND DO
<br /> SLEEVE-SEAL FITTINGS. FOR GREATER VIEWING DISTANCES. 1.6 ABOVE GROUND DOMESTIC WATER PIPING c. FINISH: CHROME PLATED, POLISHED-CHROME PLATED OR ROUGH BRONZ. NOT REFLECT ACTUAL SITE CONDITIONS.
<br /> C. CONCRETE SLABS-ON-GRADE: E. VALVE TAGS: BRASS,0.032-INCH (0.8-MM), STAINLESS STEEL, 0.025-INCH (0.64-MM), A. PIPE NPS 2 AND SMALLER: Cl. PIPING: CHROME PLATED OR COPPER. NEITHER PARTY SHALL HAVE ANY OBLIGATION
<br /> 1. PIPING SMALLER THAN NPS 6 :CAST-IRON WALL SLEEVES WITH ALUMINUM, 0.032-INCH (0.8-MM)OR ANODIZED ALUMINUM, 0.032-INCH (0.8-MM) 1. HARD COPPER TUBE;WROUGHT-COPPER; SOLDER-JOINT FITTINGS;AND e. CABINET: RECESSED OR SURFACE MOUNTED. NOR LIABILITY TO THE OTHER(EXCEPT STATED
<br /> SLEEVE-SEAL SYSTEM, GALVANIZED-STEEL WALL SLEEVES WITH SLEEVE-SEAL MINIMUM THICKNESS. SOLDERED JOINTS WITH NON-LEAD, NON-ANTIMONY SOLDER. STRAINERS FOR DOMESTIC WATER PIPING: ABOVE)UNTIL A WRITTEN AGREEMENT IS
<br /> SYSTEM, GALVANIZED-STEEL-PIPE SLEEVES WITH SLEEVE-SEAL SYSTEM OR F. WARNING TAGS:3 BY 5-1/4 INCHES(75 BY 133 MM)MINIMUM OR APPROXIMATELY 4 BY 7 2. PEX TUBE, NPS 1 AND SMALLER; FITTINGS FOR PEX TUBE;AND WITH 1. BODY: BRONZE FOR NPS 2 AND SMALLER; CAST IRON WITH INTERIOR FULLY EXECUTED BY BOTH PARTIES.
<br /> SLEEVE-SEAL FITTINGS. INCHES(100 BY 178 MM)(INSERT SIZE) ; BRASS GROMMET AND WIRE, APPROVED/MANUFACTURER COMPATIBLE JOINTS. LINING AND EPDXY COATING FOR NPS 2-1/2 AND LARGER.
<br /> D. CONCRETE SLABS ABOVE GRADE: REINFORCED GROMMET AND WIRE OR STRING FASTENERS. 3. PEX-AL-PEX TUBE, NPS 1 AND SMALLER; FITTINGS FOR PEX-AL-PEX 2. CONNECTIONS:THREADED FOR NPS 2 AND SMALLER; FLANGED FOR NPS 2-
<br /> 1. PIPING SMALLER THAN NPS 6:GALVANIZED-STEEL-PIPE SLEEVES, TUBE;AND WITH APPROVED/MANUFACTURER COMPATIBLE JOINTS. 1/2 AND LARGER. ARCHITECT OF RECORD
<br /> PVC-PIPE SLEEVES, STACK-SLEEVE FITTINGS, SLEEVE-SEAL FITTINGS, END OF SECTION 220553 3. SCREEN: STAINLESS STEEL WITH ROUND PERFORATIONS UNLESS OTHERWISE mcg architecture
<br /> 1.7 DOMESTIC WATER PIPE FITTINGS AND APPURTENANCES ARE LEAD FREE.
<br /> MOLDED-PE OR-PP SLEEVES OR MOLDED-PVC SLEEVES. INDICATED.
<br /> E. INTERIOR PARTITIONS: 4. DRAIN:PIPE PLUG, FACTORY-INSTALLED OR HOSE-END DRAIN VALVE. C> =_
<br /> 1. PIPING SMALLER THAN NPS 6 :GALVANIZED-STEEL-PIPE SLEEVES OR END OF SECTION 221116 OUTLET BOXES: C.> W w
<br /> PVC-PIPE SLEEVES. PLUMBING 1 ENAMELEDICEMAKER-STEEL OR EPDXYUTLET BOXES: -PAINTED-STEEL NTED-STEEL OR PLASTIC, LASTIC OR "
<br /> END OF SECTION 220517 STAINLESS-STEEL BOX AND FACEPLATE. cn
<br /> SECTION 220719-PLUMBING PIPING INSULATION G. HOSE STATIONS:
<br /> 1.1 QUALITY ASSURANCE 1. SINGLE-TEMPERATURE-WATER HOSE STATIONS: 15635 Alton Parkway,Suite 100,Irvine,CA 92618
<br /> A. SURFACE-BURNING CHARACTERISTICS: FLAME-SPREAD INDEX OF 25,AND a. BODY: BRONZE WITH STAINLESS-STEEL WETTED PARTS. P:949.553.1117 F:949.474.7056
<br /> PLUMBING SMOKE-DEVELOPED INDEX OF 50 FOR INSULATION INSTALLED INDOORS,75,AND b. FINISH: ROUGH BRONZE,CHROME PLATED.
<br /> SMOKE-DEVELOPED INDEX OF 150 FOR INSULATION INSTALLED OUTDOORS, c. MOUNTING: WALL, WITH REINFORCEMENT OR
<br /> SACCORDING TO ASTM E 84. FLOOR,WITH STAINLESS-STEEL PEDESTAL.
<br /> SECTION SECTION 220519-METERS AND GAGES FOR PLUMBING PIPING
<br /> 2. HOT-AND COLD-WATER HOSE STATIONS: ACIES •••• ••••
<br /> PRODUCTS 1.2 PIPING INSULATION SCHEDULE, GENERAL a. TYPE FAUCET:BLENDING OR THERMOSTATIC MIXING VALVE. oQROFES Nq•.,•.•
<br /> A. LIQUID-IN-GLASS THERMOMETERS: A. ITEMS NOT INSULATED: UNLESS OTHERWISE INDICATED, DO NOT INSTALL INSULATION b. BODY: BRONZE WITH STAINLESS-STEEL WETTED PARTS. tip;•;
<br /> c. FINISH: ROUGH BRONZEOR CHROME PLATED. ENGINEERING
<br /> 1. COMPACT-STYLE, LIQUID-IN-GLASS THERMOMETERS: ON THE FOLLOWING: Cl. MOUNTING:WALL, WITH REINFORCEMENT OR 400NMcCarthy Blvd. ;,., r.,;
<br /> a. CASE:CAST ALUMINUM OR PLASTIC;6-INCH (152-MM) 1. DRAINAGE PIPING LOCATED IN CRAWL SPACES. Suite 250,Milpitas,CA 95035 No.M28498
<br /> SIZE. 2. BELOW-GRADE DRAINAGE PIPING. FLOOR,WITH STAINLESS-STEEL PEDESTAL.
<br /> ph:(408)522-5255 't* 41
<br /> b. CASE FORM:BACK ANGLE OR STRAIGHT. 3. CHROME-PLATED PIPES AND FITTINGS UNLESS THERE IS A POTENTIAL FOR 3. COLD-WATER AND STEAM HOSE STATIONS: fx:(408)522-5260 `rr9�ec N�CP��P•'
<br /> c. TUBE: GLASS WITH MAGNIFYING LENS AND BLUE OR RED ORGANIC LIQUID. PERSONNEL INJURY. a. TYPE FAUCET:BLENDING OR THERMOSTATIC MIXING VALVE. info@acies.net •'•.•rF pF cn��Fo`�`'.•'
<br /> Cl. TUBE BACKGROUND: NONREFLECTIVE ALUMINUM WITH ETCHED SCALE IN b. BODY: BRONZE WITH STAINLESS-STEEL WETTED PARTS. Copyright©2021 .....
<br /> DEG F(DEG C)OR DEG F AND DEG C. 1.3 INDOOR PIPING INSULATION SCHEDULE c. FINISH: ROUGH BRONZE OR CHROME PLATED.
<br /> B. THERMOWELLS: A. DOMESTIC COLD WATER: FLEXIBLE ELASTOMERIC, MINERAL-FIBER, PREFORMED PIPE d. MOUNTING: WALL, WITH REINFORCEMENT OR
<br /> 1. MATERIAL FOR USE WITH COPPER TUBING:CNR OR CUNT. INSULATION,TYPE I OR PHENOLIC. FLOOR,WITH STAINLESS-STEEL PEDESTAL.
<br /> 2. MATERIAL FOR USE WITH STEEL PIPING:CRIES OR CSA. B. DOMESTIC HOT AND RECIRCULATED HOT WATER: FLEXIBLE ELASTOMERIC, H. HOSE BIBBS:
<br /> 3. TYPE: STEPPED SHANK UNLESS STRAIGHT OR TAPERED SHANK IS INDICATED. MINERAL-FIBER, PREFORMED PIPE INSULATION,TYPE I OR PHENOLIC. 1. VACUUM BREAKER: INTEGRAL OR FIELD INSTALLATION.
<br /> 4. HEAT-TRANSFER MEDIUM: MIXTURE OF GRAPHITE AND GLYCERIN. C. STORMWATER AND OVERFLOW: 1/2" MINIMUM, CELLULAR GLASS, FLEXIBLE 2. FINISH FOR SERVICE AREAS:ROUGH BRONZE OR CHROME OR NICKEL PLATED.
<br /> C. PRESSURE GAGES: ELASTOMERIC, MINERAL-FIBER, PREFORMED PIPE INSULATION,TYPE I, PHENOLIC 3. OPERATION FOR SERVICE AREAS:WHEEL HANDLE OR OPERATING KEY.
<br /> 1. DIRECT-MOUNTED, METAL-CASE, DIAL-TYPE PRESSURE GAGES: OR POLYOLEFIN. 4. OPERATION FOR FINISHED ROOMS:WHEEL HANDLE OR OPERATING KEY.
<br /> a. CASE:LIQUID-FILLED, SEALED, OPEN-FRONT-PRESSURE RELIEF OR D. ROOF DRAIN AND OVERFLOW DRAIN BODIES: 1/2" MINIMUM, CELLULAR GLASS, 5. WALL FLANGE WITH EACH CHROME-OR NICKEL-PLATED HOSE BIBB.
<br /> SOLID-FRONT-PRESSURE RELIEF TYPE(S); CAST FLEXIBLE ELASTOMERIC, MINERAL-FIBER, PREFORMED PIPE INSULATION,TYPE I, I. WALL HYDRANTS:
<br /> ALUMINUM OR DRAWN STEEL;4-1/2-INCH (114-MM)OR 6-INCH (152-MM) PHENOLIC OR POLYOLEFIN. 1. NONFREEZE WALL HYDRANTS:
<br /> DIAMETER. E. EXPOSED SANITARY DRAINS, DOMESTIC WATER,AND DOMESTIC HOT WATER: a. OUTLET: CONCEALED OR EXPOSED.
<br /> b. PRESSURE-ELEMENT ASSEMBLY: BOURDON TUBE UNLESS OTHERWISE FLEXIBLE ELASTOMERIC OR MINERAL-FIBER, PREFORMED PIPE INSULATION,TYPE I. b. FINISH: POLISHED NICKEL BRONZE OR CHROME PLATED.
<br /> INDICATED. F. EXPOSED FLOOR DRAIN BODIES,TRAPS,AND SANITARY DRAIN PIPING WITHIN 2. NONFREEZE, HOT-AND COLD-WATER WALL HYDRANTS:
<br /> c. PRESSURE CONNECTION: BRASS, WITH NPS 1/4(DN 8), NPS 1/4 OR NPS 1/2 10 FEET(3 M)OF DRAIN RECEIVING CONDENSATE AND a. OUTLET: CONCEALED.
<br /> OR NPS 1/2 , ASME 81.20.1 PIPE THREADS AND EQUIPMENT DRAIN WATER BELOW 60 DEG F(16 DEG C): 3/4" MINIMUM, FLEXIBLE b. FINISH: POLISHED NICKEL BRONZE OR CHROME PLATED.
<br /> BOTTOM-OUTLET TYPE UNLESS BACK-OUTLET TYPE IS INDICATED. ELASTOMERIC, MINERAL-FIBER, PREFORMED PIPE INSULATION,TYPE I, PHENOLIC OR 3. MODERATE-CLIMATE WALL HYDRANTS: L
<br /> Cl. DIAL: NONREFLECTIVE ALUMINUM WITH ETCHED SCALE IN PSI (KPA)OR PSI POLYOLEFIN. a. OUTLET: CONCEALED OR EXPOSED. m
<br /> AND KPA. G. HOT SERVICE DRAINS: CELLULAR GLASS OR MINERAL-FIBER, PREFORMED PIPE, b. FINISH: POLISHED NICKEL BRONZE OR CHROME PLATED. 0
<br /> e. WINDOW: GLASS OR PLASTIC . TYPE I OR II. 4. VACUUM BREAKER WALL HYDRANTS:LOOSE KEY, > c
<br /> f. RING: METAL,BRASS OR STAINLESS STEEL. H. ICE BIN DRAIN: INSULATE DRAIN LINES WITH 1/2"(13MM)THICK SELF-SEALING, LOOSE KEY OR WHEEL HANDLE OR WHEEL HANDLE. 0 ti
<br /> -0 co
<br /> GROUND HYDRANTS:
<br /> g. ACCURACY: GRADE A, PLUS OR MINUS 1 PERCENT OF MIDDLE HALF OF, SECTIONAL, CLOSED CELL FOAM. J. (n
<br /> Lo cu
<br /> GRADE B, PLUS OR MINUS 2 PERCENT OF MIDDLE HALF OF,GRADE C, PLUS I. DOMESTIC COLD AND HOT WATER IN CASEWORK AND BAR AREAS: FLEXIBLE 1. BOX: STANDARD OR DEEP PATTERN WITH COVER. ULU
<br /> OR MINUS 3 PERCENT OF MIDDLE HALF OF OR GRADE D, PLUS OR MINUS 5 ELASTOMERIC, MINERAL-FIBER, PREFORMED PIPE INSULATION,TYPE I OR PHENOLIC. 2. BOX AND COVER FINISH: ROUGH OR POLISHED NICKEL OR BRONZE. W w m U)
<br /> PERCENT OF WHOLE SCALE RANGE. J. HVAC HOT AND CHILLED WATER PIPING INCLUDING LOW PRESSURE STEAM: K. POST HYDRANTS: Q W Q N �
<br /> D. GAGE ATTACHMENTS: 1-1/2"(38MM)MINIMUM THICKNESS(OR THICKER PER LOCAL CODE)CELLULAR 1. NONFREEZE, DRAINING-TYPE POST HYDRANTS. z Q > O
<br /> 1. SNUBBERS: BRASS; WITH NPS 1/4 , NPS 1/4 OR NPS 1/2 , GLASS OR MINERAL FIBER, PREFORMED PIPE,TYPE I OR II. 2. NONFREEZE, NONDRAINING-TYPE POST HYDRANTS. z 0 U
<br /> NPS 1/2 ,AND PISTON OR POROUS-METAL-TYPE SURGE-DAMPENING 3. FREEZE-RESISTANT SANITARY YARD HYDRANTS:PLASTIC OR ZINC-PLATED STEEL UF_ �--'
<br /> DEVICE. INCLUDE EXTENSION FOR USE ON INSULATED PIPING. 1.4 OUTDOOR,ABOVEGROUND PIPING INSULATION SCHEDULE CANISTER. W V LU U C:2. VALVES:BRASS BALL OR BRASS OR STAINLESS-STEEL NEEDLE, WITH A. DOMESTIC WATER PIPING: FLEXIBLE ELASTOMERIC, MINERAL-FIBER, PREFORMED L. DRAIN VALVES:BALL-VALVE, GATE-VALVE OR STOP-AND-WASTE TYPE. __') (a --') V
<br /> M. WATER HAMMER ARRESTERS: METAL BELLOWS OR COPPER TUBE WITH PISTON. O L 0 m
<br /> NPS 1/4 , NPS 1/4 OR NPS 1/2 OR NPS 1/2, PIPE PIPE INSULATION,TYPE I OR PHENOLIC. W W Cfl L 0
<br /> THREADS. B. HOT SERVICE DRAINS: CELLULAR GLASS OR MINERAL-FIBER, PREFORMED PIPE, N. AIR VENTS: BOLTED OR WELDED CONSTRUCTION. C m Lo U
<br /> TYPE I. O. TRAP-SEAL PRIMER VALVES:SUPPLY OR DRAINAGE TYPE.
<br /> END OF SECTION 220519 C. HOT SERVICE VENTS: CELLULAR GLASS OR MINERAL-FIBER, PREFORMED PIPE
<br /> INSULATION,TYPE II. 1.3 MANUFACTURED UNITS STORE #: 8981
<br /> A. TRAP-SEAL PRIMER SYSTEMS:
<br /> 1.5 INDOOR, FIELD-APPLIED JACKET SCHEDULE 1. CABINET: RECESSED-OR SURFACE-MOUNTED STEEL BOX WITH STAINLESS-STEEL PROJECT #: 23870-070
<br /> PLUMBING A. PIPING, CONCEALED: ALUMINUM, PAINTED ALUMINUM OR STAINLESS STEEL. COVER.
<br /> B. PIPING, EXPOSED:ALUMINUM, PAINTED ALUMINUM OR STAINLESS STEEL. 2. NUMBER OUTLETS: FOUR, SIX OR EIGHT. PROFILE TYPE:
<br /> ISSUE DATE: 02-23-2021
<br /> SECTION 220523-GENERAL DUTY VALVES FOR PLUMBING PIPING 1.6 OUTDOOR, FIELD-APPLIED JACKET SCHEDULE 1.4 DOMESTIC WATER PIPE FITTINGS AND APPURTENANCES ARE LEAD FREE. PROGRAM MANAGER: <DESIGN MANAGER>
<br /> DOMESTIC HOT-AND COLD-WATER VALVES A. PIPING, CONCEALED: ALUMINUM, PAINTED ALUMINUM OR STAINLESS STEEL. STORE DESIGNER: JESSICA RAMOS
<br /> A. PIPE NPS 2 AND SMALLER: B. PIPING, EXPOSED: ALUMINUM, PAINTED ALUMINUM OR STAINLESS STEEL. END OF SECTION 221119 LEED®AP: N/A
<br /> 1. TWO-PIECE, BRASS BALL VALVES WITH FULL PORT,BRASS OR
<br /> STAINLESS-STEEL TRIM,AND LEAD FREE. CHECKED BY:
<br /> 2. THREE-PIECE, BRASS BALL VALVES WITH FULL PORT,BRASS, END OF SECTION 220719
<br /> STAINLESS-STEEL TRIM, AND LEAD FREE. MCG PROJECT#:
<br /> 3. BRONZE SWING CHECK VALVES, CLASS 125, CLASS 150, BRONZE OR MCG PROJ. MANAGER: MP
<br /> NONMETALLIC DISC WITH SOLDERED OR THREADED END CONNECTIONS, MCG PROJ. SPECIALIST: LL
<br /> AND LEAD FREE.
<br /> 4. BRONZE GATE VALVES,CLASS 125, CLASS 150,NRS OR RS WITH SOLDERED OR
<br /> THREADED ENDS,AND LEAD FREE. Revision Schedule
<br /> END OF SECTION 220523 Rev Date By Description
<br /> SHEET TITLE:
<br /> PLUMBING OUTLINE
<br /> SPECIFICATIONS
<br /> SCALE:AS SHOWN N.T.S.
<br /> SHEET NUMBER:
<br /> P-0002
<br />
|