|
PLUMBING PLUMBING
<br /> SECTION 221316-SANITARY WASTE AND VENT PIPING SECTION 221319-SANITARY WASTE PIPING SPECIALTIES
<br /> 1.1 PROJECT CONDITIONS 1.1 ACTION SUBMITTALS
<br /> A. INTERRUPTION OF EXISTING SANITARY WASTE SERVICE: DO NOT INTERRUPT A. PRODUCT DATA: FOR EACH TYPE OF PRODUCT INDICATED. INCLUDE RATED
<br /> SERVICE TO FACILITIES OCCUPIED BY OWNER OR OTHERS UNLESS PERMITTED CAPACITIES, OPERATING CHARACTERISTICS,AND ACCESSORIES FOR THE
<br /> UNDER THE FOLLOWING CONDITIONS AND THEN ONLY AFTER ARRANGING TO FOLLOWING:
<br /> PROVIDE TEMPORARY SERVICE ACCORDING TO REQUIREMENTS INDICATED: 1. FOG DISPOSAL SYSTEMS.
<br /> 1. NOTIFY CONSTRUCTION MANAGER NO FEWER THAN TWO DAYS IN ADVANCE OF 2. GREASE INTERCEPTORS.
<br /> PROPOSED INTERRUPTION OF SANITARY WASTE SERVICE. 3. GREASE REMOVAL DEVICES.
<br /> 2. DO NOT PROCEED WITH INTERRUPTION OF SANITARY WASTE SERVICE WITHOUT 4. WIRING DIAGRAMS: POWER, SIGNAL,AND CONTROL WIRING.
<br /> CONSTRUCTION MANAGER'S WRITTEN PERMISSION.
<br /> 1.2 QUALITY ASSURANCE
<br /> ©2017 STARBUCKS COFFEE COMPANY
<br /> 1.2 MATERIALS A. QUALITY STANDARD FOR BELOW GRADE PLASTIC PIPING: NSF 14.
<br /> A SERVICE-CLASS,
<br /> CAST-IRON SOIL PIPE AND FITTINGS BELOW
<br /> GRADE WHERE REQUIRED BY LOCAL
<br /> 1.3 PRODUCTS STARBUCKS COFFEE
<br /> B. HUBLESS, CAST-IRON SOIL PIPE AND CISPI, CAST-IRON OR HUBLESS PIPING A. BACKWATER VALVES: HORIZONTAL-CAST IRON, DRAIN OUTLET OR HORIZONTAL- COMPANY
<br /> COUPLINGS. PLASTIC
<br /> C. SOLID-WALL ORCELLULAR-CORE SCHEDULE 40 ABS PIPE WITH ABS SOCKET B. CLEANOUTS: 2401 UTAH AVENUE SOUTH
<br /> FITTINGS MAY BE USED ABOVE AND BELOW GRADE IF ALLOWED BY LOCAL CODE. 1. EXPOSED: COUNTERSUNK, COUNTERSUNK OR RAISED-HEAD, RAISED-HEAD, SEATTLE, WASHINGTON 98134
<br /> D. SHIELDED, NONPRESSURE OR PRESSURE BRASS,CAST-IRON OR PLASTIC CLOSURE PLUG. (206)318-1575
<br /> TRANSITION COUPLINGS. 2. CERAMIC TILE AND CARPETED FLOORS: SQUARE,ADJUSTABLE WITH NICKEL
<br /> E. UNION, FLANGE, FLANGE INSULATING KIT OR NIPPLE DIELECTRIC FITTINGS. BRONZE TOP.
<br /> F. PE-FILM ENCASEMENT FOR UNDERGROUND METAL PIPING. 3. RESILIENT(VINYL)FLOOR: SQUARE,ADJUSTABLE, NICKEL BRONZE TOP WITH THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> G. SCHEDULE 40 PVC PIPE WITH PVC SOCKET FITTING MAY BE USED BELOW GRADE COMPATIBLE FLANGE. CONFIDENTIAL AND SHALL REMAIN THE SOLE
<br /> IF ALLOWED BY LOCAL AUTHORITY. 4. WALL: ROUND, DEEP-CHROME-PLATED BRONZE,FLAT, CHROME-PLATED PROPERTY OF STARBUCKS CORPORATION,
<br /> BRASS OR STAINLESS-STEEL COVER PLATE WITH ROUND, CHROME PLATED, WHICH IS THE OWNER OF THE COPYRIGHT IN
<br /> 1.3 ADHESIVES SCREW WALL ACCESS. THIS WORK. THEY SHALL NOT BE
<br /> A. ADHESIVES SHALL NOT EXCEED A VOC CONTENT OF 51OG/L FOR PVC AND 325 C. FLOOR DRAINS: REPRODUCED(IN WHOLE OR IN PART), SHARED
<br /> G/L FOR ABS. 1. CAST-IRON FLOOR DRAINS, WITH STRAINER, BODY STYLE AND OPTIONS AS WITH THIRD PARTIES OR USED IN ANY MANNER
<br /> SPECIFIED IN PLUMBING SCHEDULE. ON OTHER PROJECTS OR EXTENSIONS TO THIS
<br /> END OF SECTION 221316 2. PROVIDE TRAP PRIMER CONNECTIONS WHERE NEEDED PER CODE AND DESIGN PROJECT WITHOUT THE PRIOR WRITTEN
<br /> REQUIREMENTS. CONSENT OF STARBUCKS CORPORATION.
<br /> D. TRENCH DRAINS TO BE AS SPECIFIED IN PLUMBING SCHEDULE. THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> E. THROUGH-PENETRATION FIRESTOP ASSEMBLIES: LISTED AND LABELED ASSEMBLY INTENDED TO EXPRESS DESIGN INTENT FOR A
<br /> OF SLEEVE AND STACK FITTING WITH FIRESTOPPING PLUG;WITH SPECIAL PROTOTYPICAL STARBUCKS STORE (WHICH IS
<br /> CORROSION-RESISTANT COATING ON INTERIOR OF FITTINGS. SUBJECT TO CHANGE AT ANYTIME)AND DO
<br /> F. MISCELLANEOUS SANITARY DRAINAGE PIPING SPECIALTIES: NOT REFLECT ACTUAL SITE CONDITIONS.
<br /> 1. OPEN DRAINS, SHOP OR FIELD FABRICATE FROM SERVICE CLASS, NEITHER PARTY SHALL HAVE ANY OBLIGATION
<br /> HUB-AND-SPIGOT, CAST-IRON, SOIL-PIPE FITTINGS. NOR LIABILITY TO THE OTHER EXCEPT STATED
<br /> 2. CAST-IRON OR BRONZE DEEP-SEAL TRAPS.
<br /> 3. FLOOR-DRAIN,TRAP-SEAL PRIMER FITTINGS. ABOVE)UNTIL A WRITTEN AGREEMENT IS
<br /> 4. AIR-GAP FITTINGS. FULLY EXECUTED BY BOTH PARTIES.
<br /> 5. COUNTERFLASHING-TYPE, CAST-IRON STACK FLASHING FITTINGS.
<br /> 6. CAST-IRON BODY VENT CAPS. ARCHITECT OF RECORD
<br /> 7. FROST-RESISTANT VENT TERMINALS.
<br /> 8. EXPANSION JOINTS. mcg architecture
<br /> 1.4 MANUFACTURED UNITS cn CZ a
<br /> A. FOG DISPOSAL SYSTEMS AS SPECIFIED IN PLUMBING SCHEDULE. R� o
<br /> B. GREASE INTERCEPTORS AS SPECIFIED IN PLUMBING SCHEDULE. LL cD
<br /> C. GREASE REMOVAL DEVICES AS SPECIFIED IN PLUMBING SCHEDULE. N
<br /> D. SOLIDS INTERCEPTORS: FACTORY-FABRICATED INTERCEPTOR MADE FOR 41)
<br /> REMOVING AND RETAINING LINT OR SEDIMENT FROM 15635 Alton Parkway,Suite 100,Irvine,CA 92618
<br /> WASTEWATER AS SPECIFIED IN PLUMBING SCHEDULE. P:949.553.1117 F:949.474.7056
<br /> END OF SECTION 221319
<br /> ACTES •'QR�FESS/pNq••.,.
<br /> PLUMBING ENGINEERING ��
<br /> SECTION 223000-DOMESTIC-WATER HEATERS400 N McCarthy Blvd. u No.M28498 a
<br /> Suite 250,Milpitas,CA 95035
<br /> ph:(408)522-5255
<br /> 1.1 QUALITY ASSURANCE .l,
<br /> A. PERFORMANCE EFFICIENCY:ASHRAE/IESNA 90.1 AND ASHRAE 90.2. fx:(4o@)52s.net ':s,9rFOr CA P�as•�
<br /> info@acies.net •••,:F OF OA`�Fo•;
<br /> B. ASME COMPLIANCE:ASME BOILER AND PRESSURE VESSEL CODE: SECTION VIII, Copyright©2021 .....
<br /> DIVISION 1.
<br /> C. NSF COMPLIANCE: NSF 61 ANNEX G, "DRINKING WATER SYSTEM COMPONENTS-
<br /> HEALTH EFFECTS."
<br /> 1.2 COMMERCIAL, ELECTRIC, DOMESTIC-WATER HEATERS
<br /> A. COMMERCIAL, LIGHT-DUTY, STORAGE, ELECTRIC, DOMESTIC-WATER HEATERS:
<br /> STEEL, GLASS LINED,VERTICAL ARRANGEMENT WITH 150-PSIG(1035-KPA)
<br /> PRESSURE RATING.
<br /> B. SEE PLUMBING SCHEDULE FOR MAKE, MODEL, CAPACITY, AND RECOVERY RATE.
<br /> 1.3 COMMERCIAL, GAS-FIRED, STORAGE, DOMESTIC-WATER HEATERS
<br /> A. COMMERCIAL,ATMOSPHERIC], POWER-BURNER OR POWER-VENT, GAS-FIRED,
<br /> STORAGE, DOMESTIC-WATER HEATERS: STEEL, GLASS LINED, VERTICAL
<br /> ARRANGEMENT WITH 150-PSIG(1035-KPA)PRESSURE RATING CONDENSING TYPE.
<br /> MINIMUM EFFICIENCY 90%. MEETS LOW NOx EMMISIONS PER CODE
<br /> REQUIREMENTS.
<br /> 1.4 DOMESTIC-WATER HEATER ACCESSORIES L
<br /> A. DRAIN PANS: CORROSION-RESISTANT METAL WITH RAISED EDGE. (D m
<br /> B. PIPING-TYPE HEAT TRAPS. > Q
<br /> C. HEAT-TRAP FITTINGS. O ti
<br /> D. GAS SHUTOFF VALVES. -0 cy)
<br /> E. GAS PRESSURE REGULATORS: PRESSURE RATING TO MATCH GAS SUPPLY U W Lo Cu
<br /> F. AUTOMATIC GAS VALVES. LLI
<br /> G. PRESSURE-REDUCING VALVES. p �
<br /> H. COMBINATION TEMPERATURE-AND-PRESSURE RELIEF VALVES. Q W Q O
<br /> I. PRESSURE RELIEF VALVES. z Q 0 U
<br /> J. VACUUM RELIEF VALVES. F F_
<br /> K. SHOCK ABSORBERS. W (, W
<br /> L .DOMESTIC-WATER HEATER STANDS. W (a W U C
<br /> M. DOMESTIC-WATER HEATER MOUNTING BRACKETS. O L O m
<br /> N. EXPANSION TANK C m L0 U
<br /> 1.5 ALL COMPONENTS OF DOMESTIC WATER SYSTEM TOUCHING DOMESTIC WATER ARE
<br /> LEAD FREE, INCLUDING ALL VALVES AND FITTINGS. STORE #: 8981
<br /> END OF SECTION 223000 PROJECT #: 23870-070
<br /> PROFILE TYPE:
<br /> ISSUE DATE: 02-23-2021
<br /> PROGRAM MANAGER: <DESIGN MANAGER>
<br /> STORE DESIGNER: JESSICA RAMOS
<br /> LEED®AP: N/A
<br /> CHECKED BY:
<br /> MCG PROJECT#:
<br /> MCG PROJ. MANAGER: MP
<br /> MCG PROJ. SPECIALIST: LL
<br /> Revision Schedule
<br /> Rev Date By Description
<br /> SHEET TITLE:
<br /> PLUMBING OUTLINE
<br /> SPECIFICATIONS
<br /> SCALE:AS SHOWN N.T.S.
<br /> SHEET NUMBER:
<br /> P-0003
<br />
|