Laserfiche WebLink
METAL FINISHING SOLUTIONS, INC. <br /> initially and periodically thereafter. Initially, most of the wastes will be analyzed under a waste profile <br /> provided by the company's waste disposal company. Other samples may taken by the company and sent <br /> to a State certified laboratory for testing. These initial analyses are shown in Exhibit 4 on the following <br /> page. <br /> Exhibit 4 <br /> Initial Waste Analysis <br /> No. Process/Waste1 Analyze for... <br /> 1 Spent process solutions Profiled for hazardous waste <br /> determination and waste code <br /> 1 Rinsewater CAM -17 metals utilizing EPA <br /> sample methods 200.8, 245.1 <br /> (Mercury) & 300.0 Fluoride <br /> 2 Hazardous Waste All potential waste (spent debris & <br /> filters) profiled for hazardous waste <br /> determination and waste code <br /> Ongoing sampling and analyses will be completed for the listed wastes as follows: <br /> • Whenever the chemical makeup of the hazardous waste changes significantly <br /> 0 22 CCR 66265.200 and 66265.402 (a)(1) <br /> • Whenever the related process significantly changes that may introduce new constituents <br /> or a change in concentration of an existing constituent <br /> 0 22 CCR 66265.200 and 66265.402 (a)(1) <br /> • Whenever new profile analyses are required by the company's disposal company <br /> • At least every three years. <br /> 1325 EI Pinal Drive Stockton,CA 95205 Tel (209)798-9328 <br />