Laserfiche WebLink
METAL FINISHING SOLUTIONS, INC. <br /> TEST METHODS <br /> All of the samples that Metal Finishing Solutions, Inc. collects for analyses in support of this Waste <br /> Analysis Plan will be analyzed in accordance with "Test Methods for Evaluating Solid Waste, <br /> Physical/Chemical Methods", SW-846, 3rd edition, 1986, U.S. Environmental Protection Agency, and <br /> the "Standard Methods for the Examination of Water and Wastewater", 21 st Edition, 2005. The following <br /> specific analytical methods will be used: <br /> • PH: Method 45001-1 <br /> • CAM — 17 Metals: EPA Method 200.8 <br /> • Mercury: EPA Method 245.1 <br /> • Fluoride: EPA Method 300.0 <br /> The analytical parameters shown in Exhibit 1 will correctly identify the hazardous wastes generated at the <br /> facility. In addition, the company's knowledge of the chemical constituents of the materials used in the <br /> facility will also provide information that will assist in the proper identification of hazardous wastes at the <br /> facility. <br /> The wastewater that is treated in the waste treatment system comes only from the process line area. <br /> Therefore, the constituents in the wastewater will be limited to the same metals and pH range listed <br /> above. <br /> 1325 EI Pinal Drive Stockton,CA 95205 Tel (209)798-9328 <br />