|
Appliance-Electrical Connection Schedule ELECTRICAL PLAN NOTES ELECTRICAL GENERAL NOTES .,
<br /> O PROVIDE FINAL CONNECTION TO AIR CURTAIN AND INTERLOCK WITH ASSOCIATED A. ANY EXISTING CONDITIONS INDICATED IN THIS SET OF DRAWINGS ARE BASED ON
<br /> Cord and Rough-in DOOR AND DEVICES.VERIFY SPECIFICATION WITH STARBUCKS PROJECT MANAGER INFORMATION PROVIDED BY OTHERS AND POSSIBLE LIMITED FIELD VERIFICATION.
<br /> 9 PRIOR TO ROUGH-IN. THE CONTRACTOR SHALL NOT EXCEED THE MOCP AND PROVIDE THE CONTRACTOR SHALL ADJUST FOR ACTUAL FIELD CONDITIONS AT NO
<br /> Mark Equipment Descri tion Voltage System Load Load Units Plug Rating Height THE PROPER DISCONNECTING MEANS. ADDITIONAL EXPENSE TO THE OWNER.
<br /> 10002 MANAGERS COMPUTER 120V 1 Phase 2 Wire 230.0 VA(Watts) 5-15P 18 B. THE CONTRACTOR SHALL VISIT THE PROJECT SITE, REVIEW EXISTING CONDITIONS
<br /> 10005 MUSIC PLAYER 120V 1 Phase 2 Wire 3.0 Ams 5-15P 18 O PROVIDE FINAL CONNECTION TO SIGNAGE. COORDINATE LOCATION AND ALL REQUIREMENTS WITH SIGN CONTRACTOR PRIOR TO ROUGH-IN. PROVIDE AN AGAINST THE CONTRACT DOCUMENTS,AND FAMILIARIZE HIMSELF WITH THE WORK
<br /> PRIOR TO BIDDING AND START OF THE WORK. BY SIGNING THE CONTRACT,THE
<br /> 10007 INKJET PRINTER 120V 1 Phase 2 Wire 591.0 VA(Watts) 5-15P 18 APPROPRIATE LOCAL DISCONNECTING MEANS MOUNTED IN AN ACCESSIBLE, CONTRACTOR ACKNOWLEDGES THE SITE VISIT HAS BEEN COMPLETED AND THE
<br /> 10008 POS REGISTER 120V 1 Phase 2 Wire 230.0 VA(Watts) 5-15P 18 INCONSPICUOUS LOCATION THAT IS WITHIN SIGHT OF THE SIGN. EACH SIGN EXISTING CONDITIONS ARE ACCEPTED.
<br /> 10010 DT ORDER MONITOR 120V, 1 Phase, 2 Wire 21.0 VA(Watts) 5-15P 65 CIRCUIT SHALL HAVE A SEPARATE NEUTRAL AND SEPARATE EQUIPMENT GROUNDING
<br /> CONDUCTOR. C. THE CONTRACTOR IS RESPONSIBLE FOR DEMOLITION OF EXISTING EQUIPMENT,
<br /> 10012 D/T COMM SYSTEM 120V, 1 Phase, 2 Wire 2.5 Ams 5-15P 96 DEVICES, LUMINAIRES, CONDUITS, SUPPORTS, HANGERS, ETC.THAT ARE NOT
<br /> O PROVIDE POWER AND DATA DEVICES FOR FUTURE DIGITAL MENU BOARDS. SHOWN AND ARE REQUIRED TO BE REMOVED IN ORDER TO COMPLETE THE NEW ©2017 STARBUCKS COFFEE COMPANY
<br /> 10014 POS PRINTER 120V 1 Phase 2 Wire 1.8 Ams 5-15P 26 COORDINATE EXACT LOCATION WITH STARBUCKS PROJECT MANAGER PRIOR TO WORK.
<br /> 10022 MONEY COUNTER 120V, 1 Phase, 2 Wire 2.5 Ams 5-15P 18 ROUGH-IN. STARBUCKS COFFEE
<br /> 10075 CUP LABELER 120V, 1 Phase, 2 Wire 1.7 Ams 5-15P 26 D. ELECTRICAL CIRCUITS THAT ARE TO BE REMOVED SHALL BE REMOVED IN THEIR
<br /> 4O IF NOT EXISTING, DUCT SMOKE DETECTOR AND RELAY FOR HVAC UNIT SUPPLY FAN ENTIRETY. CONDUCTORS SHALL BE REMOVED FROM THE ITEM TO BE DEMOLISHED
<br /> 10267 UC REFRIG 120V 1 Phase 2 Wire 4.0 Ams 5-15P 26 SHUTDOWN SHALL BE FURNISHED BY THE ELECTRICAL CONTRACTOR FOR TO THE SOURCE OVERCURRENT DEVICE. RACEWAYS WHICH ARE INSTALLED IN OR COMPANY
<br /> INSTALLATION BY THE MECHANICAL CONTRACTOR. DUCT SMOKE DETECTOR SHALL BELOW FLOORS OR WITHIN WALLS MAY BE ABANDONED, BUT ALL OVERHEAD OR
<br /> 10312 SOFT HEAT SERVER STAND 120V 1 Phase 2 Wire 0.8 Ams 5-15P 26 BE SYSTEM SENSOR#4120 OR EQUAL. THE ELECTRICAL CONTRACTOR SHALL EXPOSED RACEWAYS SHALL BE REMOVED. EXPOSED RACEWAYS TO BE ABANDONED 2401 UTAH AVENUE SOUTH
<br /> 10746 DUAL SOFT HEAT BREWER 208V, 1 Phase, 2 Wire 40.1 Ams 6-50P 26SHALL BE REMOVED AND SHALL BE CUT OR CHISELED AT LEAST 2"INTO THE WALL SEATTLE,WASHINGTON 98134
<br /> PROVIDE 120 VOLT WIRING TO THE DUCT SMOKE DETECTOR AND CONNECT TO OR FLOOR AND THE OPENING GROUTED SMOOTH. (206)318-1575
<br /> 10808 GRINDER 120V 1 Phase 2 Wire 13.0 Ams 5-20P 26 SPARE 20 AMP, 1 POLE CIRCUIT BREAKER WITH HANDLE LOCK-ON ACCESSORY. THE
<br /> 10856 BREWER SERVER HEATER 120V 1 Phase 2 Wire 0.6 Ams 5-15P 26 ELECTRICAL CONTRACTOR SHALL ALSO PROVIDE A SYSTEM SENSOR#RTS2-AOS, OR E. MAINTAIN CONTINUITY OF EXISTING CIRCUITS AS REQUIRED TO PROVIDE POWER
<br /> EQUAL, REMOTE TEST STATION/ MULTI-SIGNALING ACCESSORY. INSTALL TO REMAINING EQUIPMENT, DEVICES,AND LUMINAIRES THAT ARE NOT BEING THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> 10874 HOT WATER DISPENSER 120V 1 Phase 2 Wire 1300.0 VA(Watts) 5-15P 26 MULTI-SIGNALING ACCESSORY IN A CONTINUOUSLY ATTENDED LOCATION,TO BE REMOVED. CONFIDENTIAL AND SHALL REMAIN THE SOLE
<br /> 10970 REFRIG REACH-IN 1 DOOR 120V 1 Phase 2 Wire 8.5 Ams 5-15P 84 COORDINATED WITH THE AUTHORITY HAVING JURISDICTION AND OWNER PRIOR TO PROPERTY OF STARBUCKS CORPORATION,
<br /> F. ANY EXISTING FIRE ALARM SYSTEM SHALL REMAIN IN OPERATION THROUGHOUT WHICH IS THE OWNER OF THE COPYRIGHT IN
<br /> 11083 REACH IN REFRIG 120V 1 Phase 2 Wire 10.0 Ams 5-15P 84 ROUGH-IN. DUCT SMOKE DETECTORS ASSOCIATED WITH HVAC UNITS THAT SHARE A CONSTRUCTION.AUTOMATIC SMOKE DETECTORS IN THE AREA OF CONSTRUCTION THIS WORK. THEY SHALL NOT BE
<br /> 12336 DT TIMER SYSTEM 120V 1 Phase 2 Wire 180.0 VA(Watts) 5-15P 81 COMMON AIR PLENUM SHALL BE INTERLOCKED WITH ONE ANOTHER SUCH THAT SHALL BE DISCONNECTED AND TEMPORARILT REPLACED WITH HEAT DETECTORS WHEN REPRODUCED (IN WHOLE OR IN PART), SHARED
<br /> ACTIVATION OF ANY ONE OF THE ASSOCIATED DUCT SMOKE DETECTORS WILL SHUT THE SPACE IS STAFFED BY THE CONTRACTOR IN ACCORDANCE WITH THE APPROVED WITH THIRD PARTIES OR USED IN ANY MANNER
<br /> 12508 BLENDER 120V, 1 Phase, 2 Wire 15.0 Ams 5-15P 26 DOWN SUPPLY FANS OF ALL HVAC UNITS SHARING THE COMMON AIR PLENUM. ALL FIRE SAFETY PROCEDURES OF THE OWNER AND THE LOCAL FIRE MARSHALL, BUT ON OTHER PROJECTS OR EXTENSIONS TO THIS
<br /> 12618 U/C REFRIG 120V 1 Phase 2 Wire 4.0 Ams 5-15P 26 FINAL WIRING SHALL BE BY THE ELECTRICAL CONTRACTOR. SHALL BE REACTIVATED WHENEVER THE SPACE IS NOT OCCUPIED BY THE
<br /> CONTRACTOR.AUTOMATIC SMOKE DETECTORS SHALL BE PROTECTED FROM DUST AND PROJECT WITHOUT THE PRIOR WRITTEN
<br /> 13682 REACH IN FREEZER 120V, 1 Phase, 2 Wire 11.0 Ams 5-20P 84 O PLUGMOLD MOUNTED AT COMMUNITY TABLE.VERIFY EXACT HEIGHT AND MOUNTING DIRT ACCUMULATION BY REMOVING THE DEVICE FROM ITS BASE DURING THOSE CONSENT OF STARBUCKS CORPORATION.
<br /> 14677 DRIVE THRU REGISTER 120V, 1 Phase, 2 Wire 300.0 VA(Watts) 5-15P 22 LOCATION WITH OWNER PRIOR TO ROUGH-IN. TIMES WHEN THE SYSTEM IS ALLOWED TO BE OUT OF OPERATION. THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> STUB-UP LOCATION TO COMMUNITY TABLE. SEE 1-1104 FOR ADDITIONAL G. WHERE THE MECHANICAL DESIGN UTILIZES A PLENUM RETURN AIR CEILING INTENDED TO EXPRESS DESIGN INTENT FOR A
<br /> 14678 POS EXPEDITOR 120V 1 Phase 2 Wire 1.5 Ams 5-15P 22 O INFORMATION. DESIGN,ALL EQUIPMENT AND MATERIALS INSTALLED WITHIN THE PLENUM RETURN PROTOTYPICAL STARBUCKS STORE(WHICH IS
<br /> 15186 WAREWASHER 120/208V, 1 Phase, 3 Wire 30.5 Ams None 0 CEILING MUST MEET THE FLAME SPREAD AND SMOKE DEVELOPED RATINGS OF 25/50 SUBJECT TO CHANGE AT ANYTIME)AND DO
<br /> 15749 HOT WATER DISPENSER 120V, 1 Phase, 2 Wire 1300.0 VA(Watts) 5-15P 26 O7 RECEPTACLE COVER PLATE SHALL MATCH WALL CEILING FINISH. AND BE APPROVED FOR USE IN PLENUM RETURN CEILINGS. COORDINATE PLENUM NOT REFLECT ACTUAL SITE CONDITIONS.
<br /> CEILING LOCATIONS WITH THE MECHANICAL CONTRACTOR. LUMINAIRES THAT ARE NEITHER PARTY SHALL HAVE ANY OBLIGATION
<br /> 17564 RINSER SENSOR 120V 1 Phase 2 Wire 180.0 VA(Watts) 5-15P 26 MANUFACTURED WITH A METAL HOUSING MEET THIS REQUIREMENT AND ARE NOT NOR LIABILITY TO THE OTHER(EXCEPT STATED
<br /> 18845 ICE MACHINE AIR COOLED 208V 1 Phase 2 Wire 19.1 Ams None 72 REQUIRED TO BE PLENUM RATED UNLESS INDICATED OTHERWISE. ABOVE) UNTIL A WRITTEN AGREEMENT IS
<br /> COORDINATE ALL DEVICE LOCATIONS AND CIRCUIT ROUTING WITHIN ANY MILLWORK FULLY EXECUTED BY BOTH PARTIES.
<br /> 19559 NITRO GENERATOR 120V 1 Phase 2 Wire 6.0 Ams 5-15P 26 WITH MILLWORK VENDOR PRIOR TO ROUGH-IN.
<br /> 19742 MASTRENA ESPRESSO 208V 1 Phase 2 Wire 5950 VA(Watts) 6-50P 26 H. COORDINATE ALL DEVICE LOCATIONS AND CIRCUIT ROUTING WITH ANY MILLWORK
<br /> 20010 NITRO DISPENSER 120V 1 Phase 2 Wire 10 Ams 5-15P 26 WITH MILLWORK VENDOR PRIOR TO ROUGH-IN. ARCHITECT OF RECORD
<br /> 20032 OVEN 208V 1 Phase 2 Wire 30.0 Ams 6-30P 26 mcg architecture
<br /> I. COORDINATE THE CONNECTIONS OF ALL EQUIPMENT PROVIDED BY OTHERS WITH THE o
<br /> CONTRACTOR PROVIDING THE EQUIPMENT PRIOR TO ROUGH-IN. THIS INCLUDES, ycc
<br /> BUT IS NOT LIMITED TO, MECHANICAL EQUIPMENT, KITCHEN EQUIPMENT, = �o
<br /> AUDIOVISUAL EQUIPMENT, FIRE SUPPRESSION SYSTEM EQUIPMENT, FIRE ALARM
<br /> EQUIPMENT, ETC. THE ELECTRICAL CONTRACTOR IS RESPONSIBLE TO PROVIDE
<br /> Cz
<br /> THE APPROPRIATE DISCONNECTING MEANS FOR,AND TO MAKE THE FINAL C
<br /> CONNECTION TO,ANY HARDWIRED EQUIPMENT. THE ELECTRICAL CONTRACTOR IS
<br /> ALSO RESPONSIBLE TO PROVIDE AN APPROPRIATE CORD AND PLUG FOR ANY 15635 Alton Parkway,Suite 100, Irvine,CA 92618
<br /> B-25 CORD-AND-PLUG CONNECTED EQUIPMENT THAT IS NOT EQUIPPED WITH AN INTEGRAL P: 949.553.1117 F:949.474.7056
<br /> 2 CORD AND PLUG.
<br /> J J. SEE PANEL SCHEDULES FOR INFORMATION ON CIRCUITS THAT ARE TO BE ROUTED PROFESSIONAL STAMP of Ess
<br /> THROUGH CONTACTORS OR RELAYS FOR CONTROL. �o QR ROY so/
<br /> K. THE ELECTRICAL CONTRACTOR IS RESPONSIBLE FOR PRESERVING THE FIRE RATING cy'�9 F�
<br /> I (Ex) OF ANY FIRE-RATED CEILING ASSEMBLIES BY PROVIDING THE APPROPRIATE
<br /> FIRE-RATED LUMINAIRE TENTS AS MANUFACTURED BY TENANT OR NELSON FIRESTOP r� Z
<br /> I OR BY BUILDING FIRE-RATED ENCLOSURES AROUND EACH LUMINAIRE THAT IS N E146
<br /> 2 RECESSED INTO THE FIRE-RATED ASSEMBLY. COORDINATE FIRE-RATED CEILING
<br /> E 18845 ASSEMBLY LOCATIONS WITH THE ARCHITECTURAL DRAWINGS.
<br /> ------------- s
<br /> F
<br /> v
<br /> P
<br /> £ C
<br /> P
<br /> CTRI
<br /> 60 58 56
<br /> ENVIRONMENT IN WHICH THEY ARE INSTALLED. EQ UIPMENT MOUNTED OUTDOORS
<br /> F o
<br /> 0F CAIL
<br /> 1
<br /> F
<br /> - - SHALL BE NEMA 3R. DEVICES MOUNTED IN DAMP OR WET LOCATIONS SHALL BE
<br /> J
<br /> WEATHERPROOF. RECEPTACLES RATED 15-OR 20-AMPS AND 120 VOLTS WHICH ARE
<br /> 2 217
<br /> +.1.0.0...
<br /> +100
<br /> EQUIPPEDDate.
<br /> -- -- -- -- -- LOCATED IN DAMP OR WET LOCATIONS SHALL BE GFCI PROTECTED AND U 02/23/2021
<br /> Q
<br /> E 11083
<br /> E 13682 E10 2 _
<br /> is
<br /> WITH A SUITABLE WEATHERPROOF COVERPLATE WHILE-IN USE IN WET
<br /> LOCATIONS).
<br /> cn o — )
<br /> A 56 58 60 J
<br /> (� ,
<br /> M
<br /> 3
<br /> + - CON - GS, TERMINALS, ETC. IN ELECTRICAL DISTRIBUTION EQUIPMENT SHALL BE
<br /> = B 3 24,
<br /> #10 W/RE) 8-31
<br /> TERMINATIONS LISTED
<br /> D 1
<br /> 2 LISTED FOR A MINIMUM OF 75 DEGREE C CONDUCTORS TER
<br /> (TYP) 60 2
<br /> FOR ONLY 60 DEGREE C CONDUCTORS ARE NOT PERMITTED.
<br /> N
<br /> F.
<br /> 8-27 - - N. BRANCH CIRCUITS RATED AT 20 AMPS AT 120 VOLTS THAT ARE LONGER THAN 75
<br /> =- P 110874
<br /> --_
<br /> --------------------------------------------- --- ------ --------- ----------- FEET SHALL BE#10 AWG MINIMUM TO OFFSET VOLTAGE DROP.
<br /> �13,
<br /> J
<br /> I= B-41 (#8,#1 ,112) O. BRANCH CIRCUITS RATED AT 20 AMPS AT 120 VOLTS THAT ARE LONGER THAN 150
<br /> .....
<br /> 7
<br /> FEET SHALL BE#8 AWG MINIMUM TO OFFSET VOLTAGE DROP
<br /> 2 _ w
<br /> 5
<br /> A 7::59 _
<br /> - - P. BRANCH CIRCUITS RATED AT 20 AMPS AT 277 VOLTAS THAT ARE LONGER THAN 150
<br /> E 1518fi
<br /> -. 13 = rrV nn N
<br /> FEES SHALL BE#10 AWG MINIMUM TO OFFSET VOLTAGE DROP.
<br /> 06
<br /> 18 ............. Q. CONDUCTORS#12 AWG AND SMALLER SHALL BE SOLID. CONDUCTORS#10 AWG AND
<br /> LON
<br /> SR
<br /> I—
<br /> LARGER ARE PERM ITED TO BE STRANDED.
<br /> 57EXISTING R
<br /> NG, DUCTS, OR EQUIPMENT FOREIGN TO ELECTRICAL EQUIPMENT TO BE J �
<br /> LOCATED WITHIN THE DEDICATED SPACE ABOVE THE ELECTRIC
<br /> O4 �p f EXISTING RTU-2 GFCI == PANEL "A' AL EQUIPMENT. w
<br /> J +44 (EX) v
<br /> 1 B-19 1 (EX) (EX) EXISTING RTU-1 (EX)-
<br /> OLL
<br /> �_i1� 4 ®p Q
<br /> AC-2
<br /> U U O
<br /> _.. -.
<br /> --------------------------------
<br /> w w 00
<br /> TING ,
<br /> 1
<br /> EXIS
<br /> _. PANEL
<br /> B
<br /> __________ _- __ ---
<br /> 6
<br /> O O
<br /> 00
<br /> f AC_
<br /> CC
<br /> W r G
<br /> 5 1
<br /> J8-17
<br /> ,
<br /> -001B
<br /> PROJECT 4
<br /> '
<br /> ...... ......
<br /> -14,16,1 B-15
<br /> ==
<br /> 18r2
<br /> (Ex) E CORE
<br /> OTYPE:
<br /> DATE
<br /> SB ___ P-1
<br /> GFCI
<br /> EXISTING
<br /> 14 i jo
<br /> EF-1 20
<br /> MANAGER:PROGRAM
<br /> B-20,22 22
<br /> STORE DESIGNER: J. RAMOS
<br /> J
<br /> 22 J HWH-1
<br /> LEEDO AP: N/A
<br /> TYP B-21 GFCI CHECKED BY: GRS
<br /> 2
<br /> 7
<br /> 6099
<br /> .E...........
<br /> S
<br /> MCG PROJECT#• 20009
<br /> SR R
<br /> SR
<br /> 1
<br /> g ;: - MCG PROJ. MANAGE R: C.LEE
<br /> 1:;8
<br /> 18 AC-3 18 16
<br /> MCG PROJ. SPECIALIST: S. PARK
<br /> --------------------------------------------------------
<br /> --------------------------------------------------------------------------------------------------------------------------------------------------
<br /> -------------------------------
<br /> -----------------------------------------------------------------------------------------------------------------------------
<br /> RevisionSchedule
<br /> A 10022 A 10002
<br /> :.:8-29 A 10005 Rev Date By Description
<br /> 2 A 10007
<br /> SHEET TITLE:
<br /> POWER AND
<br /> SYSTEMS PLAN
<br /> POWER AND SYSTEMS PLAN LEGEND SCALE:AS SHOWN
<br /> 1 Scale: 1/4"= 1'-0" N EX/STING Schnackel SHEET NUMBER:
<br /> engR1EL'rs,
<br /> NEW WORK
<br /> ® NEW TO EX/STING CON E-CI70N E-1101
<br /> 8E JOBM 200472
<br />
|