INSTALL_2001 - Laserfiche WebLink

Home Browse Search

Flexible Underground 5.2 Jacket Cutter 5.5.2 Swivel Test Caps This stripping tool is used to strip Swivel test caps are available to test off a section of the green secondary all pipe sizes and are designed for jacket on the outside of the GeoFlex-D use with swivel pipe couplings.Only piping. This is required for installation the primary pipe of a GeoFlex`&-S, of either swivel pipe couplings or GeoFlex-D and GeoVent M pipe barbed fittings. section can be tested with the swivel test cap. NOTE: When using coax pipe couplings, stripping of the outer secondary jacket is not required. 5.5.3 Barbed Test Caps Barbed test caps are available to test all pipe sizes and for attachment 5.3 Coupling Machine directly to the end of a pipe section. Only the primary pipe of a GeoFlex-S, The Environ Coupling Machine is GeoFlex-D and GeoVent pipe section k required for the installation of both coax can be tested with the NPT Test Cap. __ and swivel pipe couplings. This electrically-driven hydraulic machine is designed to internally expand the metal pipe insert installed at the end of a • flexible pipe section. Coupling machines are available in both 110 and 5.6 Test Gauge Assembly 220 volt models. Consult your local This air gage assembly provides a Environ distributor for availability for means of testing only the interstitial rental or purchase of the coupling machines. space of the GeoFlex-D piping. These gauges connect to the end of the test IMPORTANT: Before and after the coupling process, the tubes and have a maximum pressure supplied dust cover should be kept on the couplings, rating of 15 psi. ,. This precaution will lessen the possibility of damage. ifi :3y 1 �i 5.4 Swivel Wrench rwl This open ended wrench is sized to fit the swivel nut of the swivel pipe 5.7 Fishing Bullnose coupling. It is used to tighten the swivel Attaches to the end of a flexible pipe nut on a metallic fitting, adapter or section in order to fish (push or pull) connector. the flexible pipe section through the NOTE: The metallic pipe GeoDuct" ducting. Its rounded nose coupling's swivel nuts should be eliminates pipe hang up on the inner hand tightened with a 1/4 turn corrugations of the GeoDuct and is with the swivel wrench for fitted with a metal eyelet for proper installation. Over- attachment of a plumber's fish. tightening of the swivel nut can damage the coupling Available in 1-1/2"and 2"pipe sizes for attachment to both coax pipe gasket. couplings and metallic pipe couplings. 5.5 Test Caps These custom threaded plugs have a 1/4" NPT port in the end 5.8 GeoFlex Trailer'" for attachment of an air gauge or a valve stem (not included). Environ offers a specially designed Test caps are used to test the integrity of each pipe section prior pipe reel trailer for transportation of the to installation. GeoFlex® piping packaged on large r'Nf I reels.The trailer is ideal for dispensing piping at the jobsite and features 4 5.5.1 Coax Test Caps automatic reel loading and unloading Coax test caps are available to test without the need for a forklift. Each 1-1/2" and 2" pipe sizes and for trailer comes with a certificate of origin attachment to coax pipe couplings. and a manufacturer's identification `'' Both the primary pipe and secondary plate. These procedures of reel jacket of the GeoFlex®-D pipe section loading and unloading should be followed to prevent damage can be tested with the coax test cap. to the piping or personal injury: 7