INSTALL_2001 - Laserfiche WebLink

Home Browse Search

Dispenser Pans Dispenser Pans are field customized to accommodate a variety of dispenser A D models and piping configurations. Additional com- 6 D ponents,such as Stabilizer Bar Assemblies, Pipe Entry 5 F Boots, Conduit Entry Boots L I and Stage 11 Entry Boots, must e be ordered separately. Standard Pans include plastic pan,mount- ing ount ing frame, anchor bolts, anchor Refer to chart on page 4 for dimensions A-E nuts,end plates and side struts. Dispenser Sumps Dispenser Sumps are deep bottom containers which are designed as a models. Dispenser Sump components include a plastic sump, rigid frame, means of secondary containment and plumbing access under an above anchor nuts,end plates and side struts. Additional required components,such ground product dispenser. They are field customized to accommodate both as Stabilizer Bar Assemblies, Flexible Entry Boots and other optional compo- flexible and non-flexible piping systems,as well as a wide variety of dispenser nents,must be ordered separately. Shallow Dispenser Sumps - Shallow Dispenser Sumps are field customized to accommodate the ' GeoFlex Piping System. Deep Dispenser Sumps Deep Dispenser Sumps are field customized to accommodate both flexible and non- ��\ flexible piping systems,as well as a wide variety of different dispenser models. Shallow Dispenser Sump � Extended Dispenser Sumps Deep Dispenser Sump Extended Dispenser Sumps are custom ordered 6"higher than the Deep Dispenser Extended Disperser Sump Sump to accommodate a deeper burial depth when a greater slope is required. Shallow Dispenser Sumps Deep and Extended Dispenser Sumps A C D - - `12-1/2"(Deep) I - 18-1/2'(Extended) 8" (Deep) 36' 12-1/2' (Extended). 24' E ____-... 24" _ _. _ E -_ Refer to chart on page 4 for dimensions A-E Refer to chart on page 4 for dimensions A-E Stabilizer Bar(SBA) Required for all Standard Dispenser Pans and Sumps. Includes:stabilizer bar Refer to chart on page 4 for correct stabilizer bar model numbers, with fasteners,spacer plate,and valve plate with fasteners. Accommodates and pan and sump model numbers. boss mounted shear valves only. Specifying Shear Valves When specifying what type and brand of shear valves are to be used,consider these design —-- specifications: •The shear valve must be a"boss mount'type for attachment to the shear valve bracket and stabilizer bar. "U-bolt"type shear valves will not work with dispenser sumps or pans. _ •With Dispenser Pan applications,the shear valve must have a"cuff base"or a"threaded base"in order to accommodate the Shear Valve Bushing and Pipe Entry Boot. •If the Petro-Trip I or 11 is to be installed(see page 12),the shear valve must have a fusible link assembly which will release easily with a trip wire.