Laserfiche WebLink
Dispenser Sump Plumbing Connections <br /> Dispenser Sump Plumbing Rigid Riser Pipes <br /> The plumbing connections required inside dispenser sumps can be simple or Rigid steel riser pipes should be used when pipe entries are located on or <br /> complicated depending upon the plumbing requirements,dispenser size and slightly off the center-line of the dispenser. Tee and/or elbow fittings should be <br /> pipe entry locations. Pipe entries which are located off the center line may used in conjunction with these steel riser pipes. <br /> require the use of the flex connectors as riser pipes instead of the standard <br /> rigid steel riser pipes. For some dispenser models,the pipe entries are locat- <br /> ed so close to the wall of the dispenser that Product Offsets are required. <br /> o ° ° o <br /> 0o a 000°° <br /> O o <br /> 0 <br /> I' <br /> Flexible Riser Pipes Product Off Sets <br /> Flexible connectors should be used when pipe entries are located significantly Some dispenser models have pipe entries located very close to the side wall of <br /> off the center-line of the dispenser. the dispenser. This condition may require the use of the Product Offset fitting <br /> to connect the dispenser to a shear valve or a check valve. <br /> -- ( ° <br /> d <br /> Securing Shear Valves Securing Check Valves Securing Riser Pipes Securing Sensors <br /> Adjustable valve mounting plates 3" Strut Clamps should be used to 1-1/2"Strut Clamps should be used 2" Strut Clamps should be used to <br /> are available for securing boss type secure check valves to the stabilizer to secure rigid auxiliary pipes to the secure leak detection sensor tubes <br /> shear valves. bars. stabilizer bars. to the stabilizer bars. <br /> __ <br /> it <br /> O <br /> 1 <br /> i <br />