INSTALL_2022 - Laserfiche WebLink

Home Browse Search

Memory B. Quick Programming Guide Enter Digits then Location Speed dial number(see section C) 1-32 digits or pauses .............................................phone number then #0 Security Code,factory set to 845464(see section E) ...................................................6 digits then #9 To add a*anywhere in the dialing string ....................................................................** To add a#anywhere in the dialing string ......................................................................*# To set dialing speed to normal-120ms tonesi10 pps(factory setting)..........................*1 To set dialing speed to fast-50ms tones120pps ...........................................................*2 To restrict Touch Tone user dialing (factory setting) ......................................................*3 To enable Touch Tone user dialing ................................................................................*4 Toggles between pulse and Touch Tone dialing (see section C) ...................................*6 To add a 4 second pause anywhere in the dialing string (see section C)......................*7 To add a 1 second pause anywhere In the dialing string ...............................................*8 To clear all programming and change back to factory settings......................................### C. Programming Examples To Program the K-1900 Series Phone to... Step 1 -See section A Step 2- Enter Digits ...to Touch Tone dial 555-1234 Enter Programming 5551234+#0 ...to pulse dial 555-1234 followed by a Touch Tone 9 Enter Programming *6 5551234*6 9+#0 ...to dial a 9, a 4 second pause and then 555-1234 Enter Programming 9 *7 5551234+#0 to set the dialing speed to fast Enter Programming *2 ...to enable unlimited user dialing after the phone has speed dialed Enter Programming *4 ...to clear the speed dial number or disable speed dialing Enter Programming #0 D. Touch Tone and Pulse Dial Speeds The K-1900 Series phone can be programmed to dial at normal or fast dialing speeds. While In the programming mode, enter*1 for normal dialing speed - 120ms on/off Touch Tones or 10 pps pulse dialing. Enter*2 for fast dialing speed - 50ms on/off Touch Tones or 20 pps pulse dialing. E. Security Code A six digit security code Is required to access the programming mode. The factory set security code is 845464 (V 1-K- I-N-G). It is recommended that you change the security code to a personal 6 digit (0-9) number in memory position#9 while in the programming mode. Note: The security code must be six digits in length and cannot contain a *or#. F. Touch Tone or Pulse Dialing The K-1900 Series phones are factory set to automatically dial using Touch Tones.A*6 entered in the speed dial num- ber will toggle the dialing mode between Touch Tone and pulse (see section C). Note: You can NOT program a *and#to be pulse dialed. G. Touch Tone User Dialing Restriction (factory enabled) The K-1900 Series phones is factory set to restrict fraudulent calls from hand held pocket dialers.After speed dialing, the K-1900 Series phones will restrict(hang up)when they detect any Touch Tone that they did not generate.To restrict user dialing,enter*3 while in the programming mode.To enable user dialing, enter*4 while in the programming mode. Adding an Internal Ringer .47 mF @ 250V An optional 0170600 Internal ringer is available. For more (included with ringer) ° Information, see DOW 834. T R . ' O °e Url O o a �o QC30 OO 0170600 LPD] E�S[I lectronic Ringer t� p Product Support Line... 715.386.8666 Fax Back Line... 715.386.4345 Due to the dynamic nature of the product design,the information contained In this document is subject to change without notice.Viking Electronics,and its affiliates and/or substdiaries assume no responsibility for errors and omissions contained in this information.Revisions of this document or new editions of it may be Issued to incorporate such changes. DOD#360 Printed in the U.S.A. ZF300950 Rev K