SU0014644 - Laserfiche WebLink

Home Browse Search

Roof valley flashing shall be provided of not less than No. 28 galvanized sheet gauge corrosion-resistant metal and shall extend at least eleven inches (11" ) from the center line each gray and shall have a splash diverter rib not less than one inch (1" ) nigh at the flow line formed as part of the flashing: Sec- tions of flashing shall have an end lap of not less than four inches Weather exeosures s n1l not exceed those set forth' in the Uniform Building; Code. Hip and ridge weather exjosu res shall not exceed those :)ermit,'ed for the field of the roof. H. PAINTING "111 paint shall be applied in strict ac--:ordance with the XI manufacturers specifications . Applicable specifications are to be considered as though written in full in these specifications . 1 . All paint shall be delivered to the job site in original containers , with la.b.e1. intact and seals unbroken. 2. Paint shall be applied evenly so as to be free of runs , streaks or defects .. All surfaces shall be thoroughly sanded and cleaned before commencing work and between each coat. All -nail holes , cracks , joints , and other small defects shall be well puttied , or spackled and sanded before starting. Noticeable defects which cannot be corrected by this Contractor shall be reported , for other correction, to the General Coutractor before paintinn work begins . Application of paint is acceptance of the conditions of the surface by the Painting Contractor, 30 Materials : All materials used are to be Fuller-O 'Brien Corporation's manufacture, or equal. No paint, varnish or stain shall be reduced or appied in any way except as herein specifically called for, or recommended by the manufacturer. a. Exterior Woodwork: 1-coat 220-23 xterior ,'rood Primer (n , work) 2-coats 260-xr, douse & Trim Paint b. Exterior ',,rood: (Siding) 2-co-- ts Olympic heavy-bodied stain. c. Exterior Metal : 1-coat 221-14 Zinc Dust - Zinc Oxide Primer (new work) 2-coats 260-xx Nouse and Trim Paint. (51 )