COMPLIANCE INFO_2023 - Laserfiche WebLink

Home Browse Search

STEP 13: DIMPLE FIRST HOLE STEP 15: DIMPLE REMAINING HOLES Remove tool. Remove any chips or burrs from the drill- Remove any chips nr hums from tyre driUing operation, ing operation. Place the assembly on a solid surface. D+mple the next(2)toles as done in Step 13. Make su re Using tate purch supplied with the 719340 1., 7154- the assembly is on a solid surface when punching- After TOOLC,and 7150-TOOLCT.align the tip of the punch punching,mmcve any chips that may haw Fallen into with zlw drdled hale Arad dlrnple i!»upp& drop tube by the 0)"tube screw hole. striking the punch with a hammer unto 0*,dmp tube is formed into countersunk hole in the inlet tube. After purxhiriq remove any ch'ps that may have fallen into the inlet Vibe screw haie. �1r AIIgn punch with drilled hole • Figtrhr i5 STEP 16-. ASSEMBLE OTHER SCREM Apply black n w*grease to screws and tighten the oth- er(2)screws into in let tine with a screwdriver as done FiPrrr T3 In Step 14. Use only the taptite screws that are supplied with ktre unit. Sea zing torque is 20 in Abs min.to 35 in- STEP 14: ASSEMBLE RBST SCREW lbs max. Da not over tighte n. Ensure that the drop tube was formed into tha cou nter- sunk screw hole as shown In Figure 14 if not return to STEP 17: APPLY GREASE TO LOWER Q-#IiNG AND Step 13. Apply black maty grease to screw and right" BQDY THREADS first screw Into inlet tubi Vial`a screwdriver. Use only Apply black molar grease to the lower cube u-nng and the taptfte screws that are supplied with the unit Seat- body threads as shown. M&a,e sum coverage is cow ing torque Ii 20 inAb&min,tri 3S i"bs Wk. Screw head pietely around the wring. iruUll a-rirxj in groove just should be flush wlththedroptube. Cao rat aver tlghr- above threads. Apply grease -1\ amuhd ring �r----Jct Gwwd4don�eb��1 iso �nrfr!esu D{ing Figure 14 groove 80eydt-nmds Figure 17