Laserfiche WebLink
3 <br />5 6 8 9 <br />(i� Q� E� <br />FILLING STERILIZING DRYING COMPLETE WATER LOW <br />OOORAJAR ERROR <br />START STOP ON/STANOSY <br />4 � <br />MA439200 <br />1. Press the ON / STANDBY button (1). <br />• The Selector / Indicator panel turns on (displays will illuminate). <br />• The Program Indicator lamps (2) flash until a sterilization program is <br />selected. <br />NOTE <br />Before operating the sterilizer, be sure the door handle is completely de- <br />pressed (latched). If the handle is not fully latched, the sterilizer will alert the <br />operatcr with an audible beep and will not start until the door handle is <br />latched. <br />2. Close and latch the door; the sterilizer will not operate unless the door is <br />closed. <br />EQUIPMENT ALERT <br />OProcessing goods using an incorrect sterilization program could <br />o result in unsterile goods and may damage instruments. Consult <br />with yo.ir supply manufacturerfor specific sterilization instructions. <br />3. Select a sterilization program in accordance with the Standard Cycle Param- <br />eters (see table later in this manual). <br />TI­eTemperature / Time display (3) displays the selected program's <br />parameters alternately. <br />If an incorrect program selection is made, select the correct program <br />cycle by pressing the correct program cycle button (2). <br />4. Press the START button (4). <br />