Laserfiche WebLink
Installing a New Cartridge Ribbon <br /> 1. Press the left side(A)of the <br /> rocker switch to toggle the <br /> printer OFF (the lamp will <br /> turn off). <br /> 2. Four small grooves (1) are <br /> embossed on the left and �EEp <br /> right side of the printer °FF° • <br /> cover. With the index finger <br /> of each hand, press down <br /> gently on these grooves. <br /> 3. When the printer cover (1) <br /> is tilted up to a near-vertical A <br /> position, you may lift it com- <br /> pletely off. <br /> 4. Push down on the right side 3 2 <br /> (B) of the ribbon cartridge B <br /> (2) (marked PUSH) and \ <br /> remove the old ribbon car- <br /> tridge. <br /> FEE° <br /> NOTE Off • <br /> If ribbon ink gets on the <br /> printer plastic case, wipe it <br /> off immediately. Once it <br /> dries, it is difficult to remove. nnA o0 <br /> 5. Install the new ribbon cartridge (2). Be sure the ribbon is inserted in front of <br /> the paper and the ribbon is flat against the paper. Press the ribbon cartridge <br /> (2) downward until it snaps into place. <br /> 6. Turn the knob (3) on the ribbon cartridge (marked by an arrow) clockwise to <br /> stretch the ribbon so it is tight. <br /> 7. Replace the printer cover (1). <br /> • <br />