Laserfiche WebLink
6. While holding the paper (1) in place, press the right side (B) of the switch to <br /> the OV / FEED position and hold. The printer will activate and a rubber roller <br /> will put the paper into the printer compartment. Continue to hold the switch <br /> down until the paper emerges from the top of the printer mechanism. Then, <br /> when 2.5 cm (1 in.) of paper has emerged from the top of the printer, release <br /> the switch. <br /> 7. Pull the paper (1) through the printer until 5 to 7.5 cm (2 to 3 in.) of paper is <br /> expolc ed. <br /> 8. Put the paper spindle (3) into the paper roll and place the roll with the spindle <br /> onto the grooves (4) at the back of the printer. <br /> 9. Turn the paper roll so as to take up the slack in the paper feeding to the <br /> printer. Make sure the roll of paper turns freely. If it does not turn freely, the <br /> paper will jam and possibly damage the printer mechanism. <br /> About the Cartridge Ribbon <br /> The printer takes a cartridge ribbon. When printing becomes faint or difficult to <br /> see, you should replace the cartridge. If the printer is used infrequently, the <br /> print impression sometimes becomes weak because the ribbon dries out. If the <br /> printed rr:aterial is difficult to read and you suspect this is the cause of the prob- <br /> lem, advance to a properly inked portion of the ribbon by pressing and holding <br /> the switch in the ON / FEED position for 3 seconds. <br />