Laserfiche WebLink
Forward Compost Facility Stormwater Improvements <br />02778 3 HDPE GEOMEMBRANE <br />barrier. Synonymous term for flexible membrane liner (FML). <br />I. Geomembrane Subsurface: The soil or geosynthetic surface on which the geomembrane lies. <br />J. GEOSYNTHETICS CONTRACTOR: The party responsible for field handling, transporting, storing, deploying, seaming, temporarily restraining (against wind), and installing the geomembrane. <br />K. Panel: The unit area of geomembrane that will be seamed in the field. If the geomembrane is not fabricated into panels in a factory, a panel is identified as a roll or portion of a roll without any seams. 1.4 SUBMITTALS <br />A. Product Data: Submit the following to the QA/QC CONSULTANT. 1. Resin Data. a. Statement of production date or dates. b. Certification stating that the resin meets the product requirements (see Paragraph 2.2). c. Certification stating that all resin used in the production of the geomembrane are of the same type, and that reclaimed polymer is limited to 10 percent reworked material. d. Copy of quality control certificates issued by manufacturer. e. Test reports from manufacturer. 2. Geomembrane Rolls. a. Statement of production date or dates, and manufacturers certificates for each day's production. b. Laboratory test results and certification stating that the geomembrane meets the product requirements of Part 2. c. Certification stating that all geomembrane rolls are furnished by one supplier, and that all rolls are manufactured from one resin type obtained from one resin supplier. d. Copy of quality control certificates issued by manufacturer and including designation of test methods used. Also include roll numbers, batch numbers, lot numbers, and roll identification. e. Test reports from the manufacturer. f. Typical results of complete notched constant tensile load test for specified resin and sheet thickness. g. Statement certifying that no reclaimed polymer is added to the resin. h. Statement listing percentages of processing aids, antioxidants, and other additives other than carbon black added to or in the resin. B. Extrudate Beads and/or Rod. 1. Statement of production date or dates. 2. Laboratory certification stating that the extrudate meets the product requirements of Part 2. 3. Certification stating that all extrudate is manufactured by one manufacturer and resin is supplied from one supplier.