Laserfiche WebLink
Fig. 2: Support Ring Spacer <br />Fig. 4: Support Ring and Plate Screwed to <br />Existing Sump <br />Fig. 3: Support Ring and Plate Snapped <br />Together <br />SOX RETRO (VINYL) INSTALLATION INSTRUCTIONS <br />1.Turn off all power to pool or spa and pump <br />systems. Installation is easiest when pool or spa <br />is drained. CAUTION DRAINING A POOL OR <br />SPA MAY CAUSE STRUCTURAL DAMAGE. <br />BEFORE DRAINING CONTACT YOUR LOCAL <br />LICENSED POOL BUILDER OR REMODELER. <br />Remove existing drain cover. (Fig. 1) <br />Place the SDX retro support plate ring on a hard <br />surface with the flange up. (Fig. 2) Place the SDX <br />retro support plate on the ring with the groves <br />facing up and with both hands pushing down, <br />snap the support plate into the support plate ring. <br />(Fig. 3) <br />Place the assembled support plate and ring over <br />the vinyl sump. Line up the correct slots with the <br />existing screw holes that were used for the <br />previous grate cover. Using the appropriate <br />screws supplied in the SDX retro kit, attach the <br />support plate and ring to the existing sump. <br />(Fig. 4) CAUTION: IF THE SUMP HAS BRASS <br />INSERTS IN IT FOR MACHINE SCREWS DO <br />NOT INSTALL; CALL PARAMOUNT FOR <br />INSTRUCTIONS. If you have a Jacuzzi MO series <br />drain use the long 10-24 pan hd screw. This <br />screw may need to be cut to fit the application. <br />(See Pg 5 for instructions on how to cut <br />screws.) <br />For technical assistance call 1.800.621.5886 or contact your regional representative <br />9