Laserfiche WebLink
Fig. 5: Support Plate Ring, Plate and Plugs <br />SDX RETRO (VINYL) INSTALLATION INSTRUCTIONS <br />Once installed, be sure that the drain cover <br />support plate is firmly in place and cannot be <br />pulled away from the pool surface. The Drain <br />cover support must be firmly in place or do <br />not proceed to next step. <br />Securely snap all (6) six oval slot plugs provided <br />into the (6) six slots in the drain cover support <br />plate. Use the plugs without tabs (marked C) over <br />screws (tabs may be broken off if necessary). <br />(Fig. 5) CAUTION: FAILURE TO PROPERLY <br />INSTALL THE PLUGS COULD DISABLE THE <br />SAFETY FEATURES OF THE SDX RETRO. <br />Attach the drain cover to the drain cover support <br />plate using the torx wrench tool and the three 10 <br />x 7/8 security screws provided. (Fig. 6) <br />Final assembly. (Fig. 7) <br />Fig. 6: Attach Drain Cover to Support Plate <br />For technical assistance call 1.800.621.5886 or contact your regional representative <br />10