Laserfiche WebLink
A. Decontamination and Disinfection: <br /> 1. Workstation surfaces/counter tops: All are fake leather and steel material. After each <br /> client, all surfaces and countertops are cleaned with soap and water to remove debris, then <br /> disinfectant(such as Cavicide or Barbicide wipes). Surfaces are allowed to remain wet for <br /> the contact time recommended on the disinfectant label and air-dried before the next <br /> client. <br /> 2. Workstation Chairs/Stools—Cleaning and Disinfection Protocol <br /> Before the Procedure: <br /> o The chair/stool is visually inspected for cleanliness. <br /> o If the area has been used for any activity since the last disinfection (e.g., <br /> consultation, setup), the chair/stool is disinfected before beginning the procedure. <br /> After Each Procedure: <br /> o The entire surface of the client chair and artist stool, including armrests, <br /> backrests, height adjustment levers, and footrests, is cleaned with a detergent <br /> if visibly soiled. <br /> o After cleaning, all surfaces are disinfected using an EPA-registered disinfectant <br /> effective against bacteria and bloodbome pathogens (e.g., [insert product name <br /> and EPA registration number]). <br /> o The disinfectant is applied according to the manufacturer's instructions for <br /> contact time and usage. <br /> Materials Used: <br /> o Disposable paper towels, single-use wipes, or clean reusable cloths (laundered <br /> between uses). <br /> o Gloves are worn during the entire cleaning and disinfection process (per <br /> §119309(d)). <br /> 3. Trays—Cleaning and Disinfection Protocol <br /> Before the Procedure <br /> o Trays are checked for cleanliness and any residual material. <br /> o If the tray has been used for any non-sterile activity since last cleaning (e.g., <br /> layout of supplies), it is re-disinfected before the procedure. <br /> After Each Procedure <br /> o The tray is: <br /> • Wiped down to remove visible debris or residue. <br /> 1 <br />