COMPLIANCE INFO PRE 2019 - Laserfiche WebLink

Home Browse Search

• Antonini Enterprises Spill Prevention, Clean Up and Reporting Training Revised Purpose: The purpose of this training is to provide information on appropriate procedures for spill prevention, clean up and reporting for spills of petroleum and other hazardous materials at the Antonini facility. Applicability: This training is applicable to Antonini employees who work around petroleum and/or other hazardous materials and include all drivers and maintenance crew. This training is intended to be provided to new hires within the first week of employment and to all employees on an annual basis. Training and Recurrence: The training will be taught in-house by Antonini Safety Supervisor and/or Maintenance Manager.Annual training will be provided during the First Quarter of each year.Training records will be retained by the Safety Supervisor for a period of no less than tree years. 1. Spill Prevention - Materials and Waste Handling and Storage • If possible,liquid or hazardous materials should be handled,used,stored, re-package and transferred indoors or under cover. • Deliveries of bulk liquids shall be supervised by Antonini employees. • Cover and contain containers,materials and wastes. • --Keep all containers closed unless adding or removing materials. • Employees using the diesel or gasoline fuel dispenser must undergo initial and annual training on proper use and operation.This is separate training. 2. Spill Kit Maintenance • Spill kits are located at the(1))Refueling Bays and(2)Maintenance Shop Area • Each Spill Kit contains a minimum 1 garbage can of"kitty litter"sorbent, I garbage can for receiving used sorbent material, 1 square point shovel, / sweep broom,and 1 dustpan. • Each spill kit shall contain the contact information of Safety Supervisor and Maintenance Manager. • The Safety Supervisor and/or Maintenance Manager islare responsible for spill kits inventory,re- ordering supplies,and coordinating disposal of spent sorbent. • Inspection of spill kit and re-supplying is done quarterly by Safety Supervisor and/or Maintenance Manager,or sooner if needed. • Employees using the kits shall report deficiencies to Safety Supervisor and/or Maintenance Manager. 3. Spill Clean Up • Clean up minor spills immediately. • Never hose down spills or leaks. • Always use"Dry Clean up Methods"for clean up of fuel spills(gas,diesel,motor oil or kerosene). o Spread absorbents("kitty litter"or loose absorbents,sheets,pillows, pigs,or socks)on the spill. o Sweep up or pick up the absorbed materials. o Dispose of wastes property within marked receptacles. • If fluids are leaking or have spilled on an impermeable surface,such as concrete,dike or berm with sorbent material to minimize spill movement. • Put down absorbent on the spill area. • After clean up, be sure to sweep up the contaminated sorbent and remove the berm or dike,disposing of these materials in marked receptacles. Page 1 of 2