Laserfiche WebLink
Attached Collar (AC) <br />This fiberglass attached collar, without flange, can be used <br />to surround the fitting(s) or manway. The collai can be used <br />with attached collar risers. I.D.s can be 42" or 48". <br />Strap locations may <br />be affected., _ <br />Attached Collar Riser (ACR) <br />This fiberglass attached <br />collar riser is intended for use <br />with a 42"- or 48" -diameter <br />attached collar. (This is sold <br />separately.) Riser body <br />is 42" or 48" 1. D., with a flat top <br />and a 22"- or 32" -diameter <br />friction -fit cover within top. This <br />riser provides an enclosure for <br />a submersible pump and also <br />provides a termination point <br />for double-wall piping systems. <br />The bonding of the riser to the <br />collar is to be done by the contractor. <br />(Adhesive kits are included.) <br />40 <br />Watertight <br />Attached Collar Riser (,�CRwT) <br />Fiberglass Holddown Strap <br />Straps are used when a tank requires anchoring. The sUaps <br />provide the link between the tank and the owner -supplied <br />anchoring hardware. For more information on straps and <br />their use, refer to the current Xerxes Installation Manual and <br />Operating Guidelines. <br />3 1/4' <br />_t::J =EE - : <br />1 3/8" <br />Deadman <br />Deadmen supplied by Xerxes are designed to <br />American Concrete Institute (ACI) standards, <br />which include the use of reinforcement bars. <br />Galvanized tie -down anchor points are <br />adjustable, making it easier for the <br />installer to properly position them <br />at the holddown-strap <br />locations on the tank. <br />This fiberglass watertight <br />attached collar riser is intended <br />for use with a 42"- or 48" -diameter <br />attached collar. (This is sold <br />Turnbuckle <br />Xerxes -supplied tumbuckles are drop -forged and are sized <br />separately.) The riser <br />to the tank ordered: 10' -diameter tanks require 3/4" x 18"; <br />body is 42" or 48" 1. D. with a <br />8' -diameter tanks require 3/4" x 12"; 6' -diameter tanks <br />26" -diameter opening.This riser <br />require 3/4" x 9" turnbuckles. Xerxes tumbuckles will con - <br />provides an enclosure for a <br />nect the tank straps directly to the concrete anchors. No <br />submersible pump and also <br />' <br />additional wire, rope or clamps are necessary if the required <br />provides a termination point <br />number of tumbuckles are used. <br />for double-wall piping systems. <br />The bonding of the riser to the <br />collar and the top m the riser <br />is done by the contractor. <br />(Adhesive kits are included.) <br />II III II II I I I II I I IIII II IIII IIII I I <br />12 <br />LI <br />