Laserfiche WebLink
Containment • <br /> Optional tank accessories for secondary containment systems, <br /> Fiberglass Secondary Containment Collar <br /> An optional secondary containment collar provides a containment area <br /> 1.0 for spilled liquids, as well as a location for the leak-monitoring sensor. <br /> Collars can be installed around other tank fittings and accessories, <br /> 75 where space permits. Collars are constructed of fiberglass and are <br /> available in 42'diameter(with 22"manways)and 48"diameter(with 22" E <br /> and 30" manways) sizes. <br /> The secondary containment collar is integrally attached to the tank top <br /> to provide a watertight seal. The collar is factory installed and tested <br /> prior to shipment. Another collar leak test should be performed at the <br /> jobsite by the installing contractor. See CSI installation instructions for details. The secondary containment <br /> collar must periodically be tested for leaks—at least once each year or after collar maintenance is performed <br /> — by adding water to the collar above the tank top. The secondary containment collar must be continuously <br /> � x <br /> monitored with an electronic sensor for potential spills or piping leaks. <br /> Q Secondary Containment Fitting <br /> A 6" FRP threaded secondary coupling is concentrically positioned <br /> around the 4" NPT primary tank fitting. The secondary containment <br /> coupling is surface-mounted onto the tank and does not penetrate the <br /> outer wall. There is no access to the tank annular space at the 6" <br /> secondary containment coupling. To directly monitor the cavity <br /> between the primary and secondary pipe, a fitting with an access port <br /> should be installed. <br /> I <br /> .4 <br />