Laserfiche WebLink
Gluing eri lectri al t6 Sump Wall <br /> 13.1) For F-1X-RR fitting models and your PVC-Coated ROBROYT"^ Brand Conduit, or your F-1X- <br /> SS fitting model's and galvanized condit should be clean and COMPLETELY DRY AT ALL TIMES. <br /> All pre-abraded or milled areas should be inspected for debris and inconsistencies. No dirt, grit, <br /> water or other foreign material should be on or inside the fiberglass fitting components. <br /> USE SMITH TM-ADHESIVE # 7069 or 8069 <br /> or AM RONTM PSX-20 8oz ONLY <br /> 6.2) Get one clamping tool ready for each fitting installation. <br /> 13.3) Follow your adhesive ' <br /> manufacturer Instructions to mix and Adhesive <br /> apply your adhesive. One bag of provided Fig. B4 <br /> fiberglass filler is to be fully mixed with each <br /> adhesive kit. (Pg. 3) <br /> DO NOT ATTEMPT TO MIX MORE <br /> THAN ONE KIT AT A TIME. pUL <br /> 6.4) Main body first - carefully apply a <br /> generous amount of adhesive to the wall and <br /> the face that will meet the wall (Fig. 134). <br /> AW&I AL � ' <br /> DO NOT ALLOW ADHESIVE TO <br /> FILL THE CHANNEL OR TEST <br /> PORT AREA <br /> OUTSIDE <br /> ONLY <br /> ONLY <br /> 77R!:Carefu;ply mixed <br /> adhesithe flange j <br /> 6 ii-F-Series-1X-SS-D-11A <br />