Laserfiche WebLink
D.Results of Testing/Servicing <br /> Software Version Installed: 331.01 <br /> MAR 2482017 <br /> Complete the following checklist: <br /> • Yes No* s the audible alarm operational? TH <br /> • Yes No* s the visual alarm operational? <br /> • Yes No* ere all sensors visually inspected,functionally tested,and confirmed operational? <br /> • Yes No* ere all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with <br /> heir Proper operation? <br /> • Yes f No* f alarms are relayed to a remote monitoring station,is ail communications equipment(e.g.modem)operational? <br /> NIA <br /> • Yes No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary containment monitoring <br /> N/A stem detects a leak,fails to operate,or is electrically disconnected?If yes:which sensors initiate positive shut-down?(Check <br /> all thatapply)r Sump/Trench Sensors; r Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection?ie Yes; r No <br /> Yes No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e. no mechanical overfiil <br /> + NSA revention valve is installed),is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly?If <br /> o at what percent of tank capacity does the alarm trigoer? <br /> Yes* 170 No Was any monitoring equipment replaced?If yes,identify specific sensors,probes,or other equipment replaced and list the <br /> manufacturer name and model for all replace ient parts in Section E below. <br /> Yes* + No as liquid found inside any secondary containment systems designed as dry systems?(Check all thata <br /> Product- r Water.If es describe causes in Section E below. pp y) <br /> + Yes No* as monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> • Yes No* s all monitoring equipment operational per manufacturer's specifications? <br /> *In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E.Comments: <br /> Monitoring System Certification Page 2 of 3 <br /> 12/07 <br />