Laserfiche WebLink
SWRL-B,January 2002 Page-of <br /> 8• RISER CONTA NTMMNT SUMP TEAWG <br /> Facility is Not Equipped With Fill Riser Containment Sumps <br /> Fill Riser Containment Sumps are Present,but were Nat Tested <br /> Test Method Developed By: X Sump Manufacturer X Industry Standard Professional Engineer <br /> Other(Specify) <br /> Test Method Used: Pressure Vacuum X Hydrostatic <br /> Other(Specify) <br /> Test Equipment Used: Incon Equipment Resolution: <br /> Sump Diameter: Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> starting test: <br /> Test Start Time: <br /> Initial Reading (Rj): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-R,): <br /> Pass 'ail Threshold or Criteria: +/-.002 +/-,002 +/_,002 +/-.002 <br /> Test Result: Pass Fail Pass Fail, Pass. Fail, Pass; Fail: <br /> Is there a sensor in the sump? Yes No Yes No Yes No Yes No <br /> Does the sensor alarm when <br /> either product or water is Yes No NA Yes No NA Yes No NA Yes No NA <br /> detected? <br /> Was sensor removed for testing"? Yes No NA Yes No NA Yes No NA Yes No NA <br /> Was sensor properly replaced and <br /> verified functional after testing? Yes No NA Yes No NA Yes No NA Yes No NA <br /> Comments —(include infonnation on repairs made prior to testing, and recommended follow-up for failed tests) <br />