COMPLIANCE INFO_2016-2018 - Laserfiche WebLink

Home Browse Search

• • RECEIVED JAN 0 3 2017 7. UNDER-DISPENSER CONTAINMENT(UDC)TESTING Test Method Developed By: ❑ UDC Manufacturer N Industry Standard ❑ FEAVIRO LTH ❑ Other(Spectfy) DEPARTMENT Test Method Used: ❑ Pressure ❑ Vacuum ®Hydrostatic ❑ Other(Specify) Test Equipment Used: Incon Sump Tester Equipment Resolution: +/-0.002" UDC_#9/10 UDC#11/12 UDC Manufacturer: Environ Environ UDC Material: Plastic Plastic UDC Depth: 31" 31" Height from UDC Bottom to Top 7„ 7„ of Highest Piping Penetration: Height from UDC Bottom to 4" 4" Lowest Electrical Penetration: Condition of UDC prior to Good Good testing: Portion of UDC Tested 2"above piping 2"above piping Does turbine shut down when UDC sensor detects liquid(both ❑Yes❑No ®NA ❑Yes❑No ®NA product and water)? ater?� Turbine shutdown response time N/A N/A Is system programmed for fail- safe shutdown? ❑yea❑No ®NA ❑Yas❑No ®NA Was fail-safe verified to be operational?' ❑Yea❑No ®NA [__IYes[INo ®NA Wait time between applying pressure/vacuum/water and 30 minutes 30 minutes starting test Test Start Time: 2:07 pra Initial Reading(R,): 2.8474 Test End Time: 2:22 pm Final Reading(RP): 2.8487 Test Duration: 15 min. Change in Reading(RF-R,): 0.0013 Pass/Fail Threshold or Criteria: +/-0.002" Test Result: ® Pass ❑Fail ❑ Paas ®Fall Was sensor removed for testing? ®Yes❑No❑NA ❑Yes® No❑NA Was sensor properly replaced and ®yes❑No❑NA ❑Yes❑No❑NA verified functional after testin T _Comments—(include information on repairs made prior to testing and recommended follow-up for ailed tests) "Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work". Visual failures to UDC 11/12. If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)