Laserfiche WebLink
RECEIVED <br /> S. FILL RISER CONTAINMENT SUMP TESTING JAN 0 3 2017 <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ I=NVIRONMENTALTN <br /> Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑Profes.O@pPQiti <br /> ❑ Other(Spec6) <br /> Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used: Incon Sump Tester Equipment Resolution: +/-0.002" <br /> Fill Sump#87 Fill Sump#89 Fill Sump#91 Fill Sump#Diesel <br /> Sump Diameter: 42" 42" 42" 42" <br /> Sump Depth: 66" 66" 66" 66" <br /> Height from Tank Top to Top of 18" 18" 181, 18" <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 5" 5" 5" 5" <br /> Electrical Penetration: <br /> Condition of sump prior to I testing: Good Good Good Good <br /> Portion of Sump Tested 2"above piping 2"above piping 2"above piping 2"above i in <br /> Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes <br /> starling test: <br /> Test Start Time: 1:12 pru 1:35 pin 2:03 pin 4:59 prn <br /> Initial Reading 4,1793 4.9124 6.1389 6.3962 <br /> Test End Time: 1:27 Inn 1:50 pm 2:18 put 5:14 pm <br /> Final Reading(RF): 4.1797 4.9126 6.1394 6.4120 <br /> Test Duration: 15 min. 15 min. 15 min. 15 min. <br /> Change in Reading RF-RI : 0.0001 0.0002 0.0005 0.0158 <br /> Pass/Fail Threshold or Criteria: +/.0.002" +/-0.002" +/-0.002" +/-0.002" <br /> Test Result: ®Pass ❑Fail ® Pass ❑Fail ®Pass ❑Fail ❑Pass ®Fail <br /> is there a sensor in the sump? ®Yes ❑No ®Yes ❑No ® Yes ❑No ®Yes []No <br /> Does the sensor alarm when <br /> either product or water is [IYes❑No®NA ❑Yes❑No®NA ❑Yes[]No®NA ❑Yes❑No®NA <br /> detected? <br /> Was sensor removed for testing? ®Yes❑No❑NA ®Yes❑No❑NA N Yes❑No❑NA ®Yes❑No❑NA <br /> Was sensor properly replaced and ®yes❑No ❑ NA ®Yes❑No❑ NA ®Yes❑No❑ NA ®Yes❑No❑ NA <br /> verified functional after testing? <br /> Comments—(include information on repairs made prior to testing, and recommended ollow-up for ailed tests) <br /> Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work <br /> Diesel Fill- Failed, need to further investigate. <br />