Laserfiche WebLink
SWRCB,January 2002 • • <br /> Page of <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facili is Not Equipped With Fill Riser Containment Sumps <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test ethod Developed By: ❑SuAp Manufacturer ❑Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test Method thed: ❑Pressure ❑Vacuum ❑Hydrostatic <br /> \.\ ❑Other(Sped) <br /> Test Equipment Used: Equipment Resolut' <br /> Fill Sum # Fill Sum # Fill Sum tE Fill Sum # <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> starting test: <br /> Test Start Time: <br /> Initial Reading(Rt): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-R& <br /> Pass/Fail Threshold or Criteria.. <br /> Test Result: ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ ss ❑Fail <br /> Is there a sensor in 06 sump? ❑Yes ❑No ❑Yes ❑No ❑Yes ❑No ❑Ve& ❑No <br /> Does the sensor arm when <br /> either produ516r water is ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No NA <br /> detected? <br /> Was sensor removed for testing? ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No DNA- <br /> Was sensor properly replaced and ❑yes ❑No ❑NA ❑Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> verified functional after testing? <br /> Comments— (include information on repairs made prior to testing, and recommended ollow-uporfailed tests) <br />