COMPLIANCE INFO 2006-2012 - Laserfiche WebLink

Home Browse Search

Page 7 of 9 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑Sump Manufacturer IN Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: - ❑Pressure ❑Vacuum ®Hydrostatic ❑Other(Specify) Test Equipment Used: See attached testing procedures Equipment Resolution: Fill Sump #87-1 Fill Sump #87-2 Fill Sump #91 __ Fill Sump Sump Diameter. 48" 48" _ 48" Sump Depth: 59" 52" _ 55" Height from Tank Top to Top of 12" 13" 12" Highest Piping Penetration: Height from Tank Top to Lowest 24" 20" 20" Electrical Penetration: Condition of sump prior to Fair Fair Fair testing: Portion of Sump Tested Above highest Above highest Above highest Above highest penetration penetration penetration penetration Sump Material&Manufacturer: Fiberglass Fiberglass Fiber ass Wait time between applying pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes starting test: Test Start Time: 10:26am 10:26am 10:21am Initial Reading(R,): 4.0194 3.2888 2.5652 Test End Time: 10:41am 10:41am 10:36am Final Reading(RF): 4.0200 3.2892 2.5657 Test Duration: 15 min 15 min 15 min 15 min Chane in Reading(RF-R,): 0.00062 0.00037 0.00050 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: ® Pass =Fail N Pass LJ Fall ® Pass El Fail Pass Fail Is there a sensor in the sump? ®Yes ❑No ®Yes No Yes No Yes No Does the sensor alarm when either product or water is ❑Yes ❑No ®NA [-]Yes [-]No®NA ❑Yes ❑No®NA ®Yes ❑No❑NA detected? Was sensor removed for testing? ®Yes El No ❑ ®Yes El No ®Yes ❑No [INA ®Yes [-]No❑NA Was sensor properly replaced and NA NA EYes ❑No ❑NA Yes verified functional after testing? ® ❑No❑NA ®Yes ❑No❑NA ®Yes ❑No❑NA Comments—(include information on repairs made prior to testing and recommendedfollow-up forfailed tests)