Laserfiche WebLink
ti► `� Page 8 of 10 <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: L] Sump Manufacturer ® Industry Standard ❑Professional Engmeer <br /> ❑Other(Specify) ENVIRONMP <br /> Test Method Used: ❑Pressure ❑vacuum ®HyliTbi r1C6Ap"fF:M <br /> ❑ Other(Specify) <br /> Test Equipment Used: See attached testing procedures Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested Above highest Above highest Above highest Above highest <br /> penetration penetration penetration netration <br /> Sump Material&Manufacturer: <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes <br /> starting test: <br /> Test Start Time: <br /> Initial Reading(R,): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-R,): <br /> Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 <br /> Test Result: ❑ Pass ❑Fail El Pass ❑Fail ❑ Pass ❑ Fail Lj Pass Lj Fail <br /> Is there a sensor in the sump? Yes El No Lj Yes Lj No El Yes El No LJ Yes No <br /> Does the sensor alarm when <br /> either product or water is ❑Yes ❑No ❑NA ❑Yes❑No ❑NA ❑Yes❑No ❑NA ❑Yes❑No ❑NA <br /> detected? <br /> Was sensor removed for testis ? Yes ❑No ❑NA ❑Yes❑No ❑NA [-]Yes❑No [INA ❑Yes❑No ❑NA <br /> Was sensor properly replaced and ❑yes ❑No ❑NA ❑Yes❑No [-INA [—]Yes No <br /> verified functional after testing? ❑ (—INA [—]Yes❑No ❑NA <br /> COMMellts— (include information on repairs made prior to testing, and recommended follow-up forfailed tests) <br /> All Fill sumps brine filled <br />