INSTALL_2017 - Laserfiche WebLink

Home Browse Search

4. Qualified service technicians must possess or work under the direct and personal supervision of an individual physically present at the work site, at all times while work is being performed, who possesses all of the following: • One of several permissible valid, current contractor licenses issued by the Contractors State License Board (may be issued to the installation company), and • A valid, current California UST Service Technician certificate issued by the International Code Council (ICC), and • A valid, current certificate of training from the manufacturer(s) of the component(s) being tested, repaired, or serviced, additionally, • Each person installing or testing any component must hold a certificate of training from the manufacturer of that component. 5. All primary containment including any integral secondary containment system must be certified by an independent testing organization and labeled as required by the organization (Title 23 Chapter 16, 2631(b); (UL, ULC, ANSI, API, ASTM, etc. See Title 23 Chapter 16 Table B for complete list.) Pursuant to Underwriters Laboratories Inc (UL) listing requirements, only those products bearing the UL mark will be considered listed. ANY PART/PRODUCT NOT MARKED WITH THE UL LABEL OR ANOTHER LISTED TESTING ORGANIZATION WILL BE REJECTED. All secondary containment system which is not an integral part of the primary containment shall be designed and constructed according to an engineering specification approved by a state registered professional engineer or according to a nationally recognized industry code or engineering standard (Title 23 Chapter 16, 2631(d)). 6. Contact Stacy Rivera, Sr. REHS at (209) 468-3440 or John Alaniz, EHS at (209) 468- 3147, for the following inspections. See the permit inspection checklist more information. All appointments must be scheduled 48 hours in advance. Completed inspections have been marked as "Completed". All items not marked as completed are still needed. Inspection of tank vacuum gauge or inspection for brine leaks prior to tank placement in excavation. All tank's pre-installation tests shall be performed according to tank's manufacturer instructions. Provide field-completed Containment Solutions, Inc. (CSI) tank installation checklist(s) upon completion. (Completed) u Verification of tank set, anchorage, backfill, and corrosion protection of tank anchors. Corrosion protection on all exposed metal prior to covering (Completed) ▪ Pressure test of the primary UST(s) containment according to manufacturer's specifications (Completed) ▪ Primary piping soap test of all piping and penetrations (product and vent): One-hour pneumatic pressure test at 110% of operating pressure, or 40 psi, whichever is greater. (Completed) 117 Secondary piping slope (at 1/8 inch per foot or greater) to a containment sump with an audible/visual alarm. (Completed) o Secondary piping soap test of all piping and penetrations (product and vent): One- hour pneumatic pressure test at the manufacturer's recommended pressure. (Completed) LI Verification of pipe set backs and burial depth according to the manufacturer's installation instructions. Verification of appropriate backfill. (Completed) Arco AM/Pill, 1305 S. Escalon Ave., Escalon, CA 95209 5R007,1800 2