WORK PLANS - Laserfiche WebLink

Home Browse Search

F_ ADA/CBC Notes ADA/CBC Notes (Continued) ADA/CBC Notes (Continued) ADA/CBC Notes (Continued) _ E. PLUMBING FIXTURES AND FACILITIES SIGNS RELATED TO TOILETS AND BATHING FACILITIES 15. Where more than one check-out aisle is provided, check-out aisles complying with 11 B-904.3 Check-Out 3. In residential dwelling units required to comply with 11 B-809 Residential Dwelling Units,at least one 30 inch Aisles shall be identified by a sign complying with 11 B-904.3.4 Identification Sign.Where check-out aisles are wide minimum section of counter shall provide a kitchen work surface that complies with the following: TOILET AND BATHING ROOM CLEARANCES 27. Entrances leading to toilet rooms and bathing rooms complying with 11 B-603 Toilet and Bathing Rooms shall identified by numbers, letters,or functions,signs identifying check-out aisles complying with 11 B-904.3 §11 B-804.3 be identified by a geometric symbol complying with 11 B-703.7.2.6 Toilet and Bathing Room Geometric Check-Out Aisles shall be located in the same location as the check-out aisle identification. §1I B-216.11 a. A 30 inch wide by 48 inch deep forward approach clear floor space shall be provided.The clear floor 1. Where toilet facilities and bathing facilities are provided,they shall comply with 11B-213 Toilet Facilities and Symbols.Where existing toilet rooms or bathing rooms do not comply with 11 B-603 Toilet and Bathing (See exception) space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying Bathing Facilities.Where toilet facilities and bathing facilities are provided in facilities permitted by Rooms,directional signs indicating the location of the nearest compliant toilet room or bathing room within 16. Where Cleaner Air Symbols are provided,they shall comply with 11 B-216.13 Cleaner Air Symbol. with 11 B-306 Knee and Toe Clearance. 11 B-206.2.3 Multi-Story Buildings and Facilities Exceptions 1 and 2 not to connect stories by an accessible the facility shall be provided. Signs shall comply with 11 B-703.5 Visual Characters and shall include the 17. Signs shall comply with 11 B-703 Signs.Where both visual and tactile characters are required,either one sign EXCEPTION:Cabinetry shall be permitted provided all of the following are met: route,toilet facilities and bathing facilities shall be provided on a story connected by an accessible route to an International Symbol of Accessibility complying with 11 B-703.7.2.1 ISA.Where existing toilet rooms or with both visual and tactile characters,or two separate signs,one with visual, and one with tactile characters, 1.the cabinetry can be removed without removal or replacement of the kitchen work surface; accessible entrance. §11 B-213.1 bathing rooms do not comply with 11 B-603 Toilet and Bathing Rooms,the toilet rooms or bathing rooms shall be provided: I.the finish floor extends under the cabinetry;and 2. Where separate toilet facilities are provided for the exclusive use of separate user groups,the toilet facilities complying with 11B-603 Toilet and Bathing Rooms shall be identified by the International Symbol of a. Signs as specified in Section 11B-703 Signs, or in other sections of this code,when included in the iii.the walls behind and surrounding the cabinetry are finished. serving each user group shall comply with 11 B-213 Toilet Facilities and Bathing Facilities.§11 B-213.1.1 Accessibility complying with 11 B-703.2.1 ISA.Where clustered single user toilet rooms or bathing facilities construction of new buildings or facilities,or when included, altered or replaced due to additions, b. The kitchen work surface shall be 34 inches maximum above the finish floor or ground. 3. Where toilet rooms are provided, each toilet room shall comply with 11 B-603 Toilet and Bathing Rooms. are permitted to use exceptions to 11 B-213.2 Toilet and Bathing Rooms,toilet rooms or bathing facilities alterations or renovations to existing buildings or facilities,and when a permit is required,shall comply EXCEPTION:A counter that is adjustable to provide a kitchen work surface at variable heights,29 Where bathing rooms are provided, each bathing room shall comply with 11 B-603 Toilet and Bathing Rooms. complying with 11B-603 Toilet and Bathing Rooms shall be identified by the International Symbol of with 11 B-703.1.1.1 Plan Review and 11 B-703.1.1.2 Inspection. inches minimum and 36 inches maximum,shall be permitted. ©2017 STARBUCKS COFFEE COMPANY §11 B-213.2 (See exception) Accessibility complying with 11 B-703.7.2.1 ISA unless all toilet rooms and bathing facilities comply with b. Plans,specifications or other information indicating compliance with these regulations shall be submitted c. There shall be no sharp or abrasive surfaces under the work surface counters. 4. Unisex toilet rooms shall contain not more than one lavatory,and not more than two water closets without 11 B-603 Toilet and Bathing Rooms. Existing buildings that have been remodeled to provide specific toilet to the enforcing agency for review and approval. 4. Sinks shall comply with 11 B-606 Lavatories and Sinks. 11B-804.4 rn urinals or one water closet and one urinal. Unisex bathing rooms shall contain one shower or one shower and rooms or bathing rooms for public use that comply with these buildingstandards shall have the location of c. Signs and identification devices shall be field inspected after installation and approved by the enforcing 5. At least 50 percent of shelf space in storage facilities shall comply with 1 1 B-811 Storage. 1 1 B-804.5 STARBUCKS COFFEE 2+ one bathtub,one lavatory,and one water closet. Doors to unisex toilet rooms and unisex bathing rooms shall and the directions to these roams posted in or near the building lobby entrance on a sign complying with agency prior to the issuance of a final certificate of occupancy per Chapter 1, Division II, Section 111, or 6. Kitchen appliances shall comply with the following: §11 B-804.6 5 have privacy latches. §71B-213.2.1 11 B-703.5 Visual Characters, including the International Symbol of Accessibility complying with final approval where no certificate of occupancy is issued.The inspection shall include,but not be limited a. A clear floor or ground space complying with 11 B-305 Clear Floor or Ground space shall be provided at COMPANY = 5. Plumbingfixtures and accessories provided in a toilet room or bathing room required to cam with i IB-703.3.2.1 ISA. §11 B-216.8 to,verification that Braille dots and cells are properly spaced and the size, proportion and type of raised each kitchen appliance.Clear floor or rounds aces shall be permitted to overt 2401 UTAH AVENUE SOUTH P 9 eq PY PP 9 P P n ) with characters are in compliance with[hese regulations. b. Alla appliance controls shall comply with 11 B-309 Operable Parts. See exceptions) 11 B-213.2 Toilet and Bathing Rooms shall comply with 11 B-213.3 Plumbing Fixtures and Accessories. 28. Pictograms shall comply tit the following: p eg pp p y p ( 9 PY 9 9 PY 9SEATTLE, WASHINGTON 98134 retl 6. Door shall not swing into the clear floor space or clearance required for any fixture.Other than the door to the a. Pictograms shall have a field of 6 inches minimum.Characters and Braille shall not be located in the 18. Raised characters shall comply with 11 B-703.2 Raised Characters and shall be duplicated in Braille c. Clear floor or ground space shall be positioned adjacent to the dishwasher door.The dishwasher door,in v accessible water closet compartment,a door in any position,may encroach into the turning space by 12 pictogram field. §11B-703.6.1 complying with 11 B-703.3 Braille. Raised characters shall be installed in accordance with 11 B-703.4 the open position,shall not obstruct the clear floor or ground space for the dishwasher or the sink. (206) 318-1575 Co inches maximum. §11B-213.2.3 b. Pictograms and their field shall have a non-glare finish. Pictograms shall contrast with their field with Installation Height and Location. d. At the range or cooktop,where a forward approach is provided,the clear floor or ground space shall Ir 7. At single user toilet or bathing rooms, doors shall be permitted to swing into the clear floor space or clearance either a light pictogram on a dark field or a dark pictogram on a light field. §11 B-703.6.2 a. Raised characters shall be 1/32 inch minimum above their background. provide knee and toe clearance complying with 1 l B-306. Where knee and toe space is provided,the THESE DRAWINGS AND SPECIFICATIONS ARE = required for any fixture only if a 30 inch by 48 inch minimum clear floor space is provided within the room c. Pictograms shall have text descriptors located directly below the pictogram field.Text descriptors shall b. Characters shall be uppercase. underside of the range or cooktop shall be insulated or otherwise configured to prevent burns,abrasions, CONFIDENTIAL AND SHALL REMAIN THE SOLE 2 beyond the arc of the door swing.§11 B-213.2.3(See exception) comply with 11 B-703.2 Raised Characters, 11 B-703.3 Braille and 11 B-703.4 Installation Height and c. Characters shall be sans serif. Characters shall not be italic,oblique,script, highly decorative,or of other or electrical shock.The location of controls shall not require reaching across burners. PROPERTY OF STARBUCKS CORPORATION, Q 8. Mirrors located above the lavatories or countertops shall be installed within the bottom edge of the reflecting Location.§11B-703.6.3 unusual forms. e. Ovens shall comply with the following: WHICH IS THE OWNER OF THE COPYRIGHT IN r surface 40 inches maximum above the finish floor or ground. Mirrors not located above the lavatories or d. The installation height and location of Pictogram signs shall be per§11B-703.4.1 d. Characters shall be selected from fonts where the width of the uppercase letter"O"is 55-60 percent I.Side-hinged door ovens shall have the work surface required by 11 B-804.3 Kitchen and Work THIS WORK. THEY SHALL NOT BE 0 countertops shall be installed with the bottom edge of the reflecting surface 35 inches maximum above the 29. Symbols shall comply with the following: minimum and 110 percent maximum of the height of the uppercase letter T'. Surfaces positioned adjacent to the latch side of the oven door. REPRODUCED (IN WHOLE OR IN PART),SHARED W finish floor or ground.§11 B-603.3 a. Doorways leading to toilet rooms and bathing rooms shall be identified by a geometric symbol complying e. Character height measured vertically from the baseline of the character shall be 5/8 inch minimum and 2 ii. Bottom-hinged door ovens shall have the work surface required by 11 B-804.3 Kitchen and Work WITH THIRD PARTIES OR USED IN ANY MANNER 00 9. Coat hooks shall be located within one of the reach ranges specified in Section 11B-308. Shelves shall be with 11 B-703.7.2.6 Toilet and Bathing Facilities Geometric Symbols.The symbol shall be mounted at 58 inches maximum based on the height of the uppercase letter"I". Surfaces positioned adjacent to one side of the door. ON OTHER PROJECTS OR EXTENSIONS TO THIS located 40 inches minimum and 48 inches maximum above the finish floor. Medicine cabinets shall be inches minimum and 60 inches maximum above the finish floor or ground surface measured from the f. Stroke thickness of the uppercase letter"I"shall be 15 percent maximum of the height of the character. iii. Ovens shall have controls on front panels. PROJECT WITHOUT THE PRIOR WRITTEN LO located with a usable shelf no higher than 44 inches maximum above the finish floor.§11 B-603.4 centerline of the symbol. Where a door is provided the symbol shall be mounted within l inch of the g. Character spacing shall be measured between the two closest points of adjacent raised characters I. Combination refrigerators and freezers shall have at least 50 percent of the freezer space 54 inches CONSENT OF STARBUCKS CORPORATION. M 10. Where towel or sanitary napkin dispensers,waste receptacles,or other accessories are provided in toilet vertical centerline of the door.§71 B-703.7.2.6(See exception) within a message, excluding word spaces.Where characters have rectangular cross sections,spacing maximum above the finish floor or ground.The clear floor or ground space shall be positioned for a THESE DRAWINGS AND SPECIFICATIONS ARE � facilities at least one of each type shall be located on an accessible route.All operable arts includingcoin b. Men's toilet and bathing facilities shall be identified by an equilateral triangle, 1�4 inch thick with edges 12 between individual raised characters shall be 1/8 inch minimum and 4 times the raised character stroke parallel approach to the space dedicated to a refrigerator/freezer with the centerline of the clear floor or INTENDED TO EXPRESS DESIGN INTENT FOR A Yp p p width maximum.Where characters have other cross sections,spacing slots,shall be 40 inches maximum above the finish floor. Baby changing stations are not required to comply inches long and a vertex pointing upward.The triangle symbol shall contrast with the door,either light on p g between individual raised ground space offset 24 inches maximum from the centerline of the dedicated space. PROTOTYPICAL STARBUCKS STORE(WHICH IS N with Section 11 B-603.5(See exception)§11 B-603.5 a dark background or dark on a light background.§11 B-703.7.2.6.1 characters shall be 1/16 inch minimum and 4 times the raised character stroke width maximum at the 7. Sinks.Where sinks are provided,at least 5 percent, but no fewer than one,of each type provided in each SUBJECT TO CHANGE AT ANYTIME)AND DO = 11. Toilet and bathing rooms within guest rooms that are not required to provide mobility features complying with c. Women's toilet and bathing facilities shall be identified by a circle, 1.4 inch thick and 12 inches in base of the cross sections,and 1/8 inch minimum and 4 times the raised character stroke width accessible room or space shall comply with Section 11 B-606. NOT REFLECT ACTUAL SITE CONDITIONS. rn Section 11 B-806.2 Guest Rooms with Mobility Features shall provide all toilet and bathing fixtures in a diameter.The circle symbol shall contrast with the door,either light on a dark background or dark on a maximum at the top of the cross sections. Characters shall be separated from raised borders and a. Mop, service or scullery sinks shall not be required to comply with Section 11B-212.3.(See exception) NEITHER PARTY SHALL HAVE ANY OBLIGATION 0 location that allows a person using a wheelchair measuring 30 inches by 48 inches to touch the wheelchair light background. §11 B-703.7.2.6.2 decorative elements 3/8inch minimum. b. Scrub sinks, as defined in California Plumbing Code Section 221.0, shall not be required to comply with NOR LIABILITY TO THE OTHER(EXCEPT STATED M to any lavatory, urinal,water closet,tub, sauna, shower stall and any other similar sanitary installation, if d. Unisex toilet and bathing facilities shall be identified by a circle, 1,4 inch thick and 12 inches in diameter h. Spacing between the baselines of separate lines of raised characters within a message shall be 135 Section 11B-606.(See exception) ABOVE) UNTIL A WRIT-FEN AGREEMENT IS !-\I provided. with a 1.4 inch thick triangle with a vertex pointing upward superimposed on the circle and within the percent minimum and 170 percent maximum of the raised character height. FULLY EXECUTED BY BOTH PARTIES. 2 12-inch diameter.The triangle symbol shall contrast with the circle symbol, either light on a dark i. Text shall be in a horizontal format. GENERAL EXCEPTIONS Q WATER CLOSERS AND TOILET COMPARTMENTS background or dark on a light background.The circle symbol shall contrast with the door, either light on a 19. Braille shall be contracted(Grade 2) and shall comply with 11 B-703.3 Braille and 11 B-703.4 Installation STARBUCKS TEMPLATE VERSION 12017.05.18 dark background or dark on a light background.§11 B-703.7.2.6.3 Height and Location: 1. Spaces and elements within employee work areas shall be designed and constructed so that individuals with 0 1. The water closet shall be positioned with a wall or partition to the rear and to one side.The centerline of the a. Braille dots shall have a domed or rounded shape and shall comply with Table 11B-703.3.1.The disabilities can approach, enter, and exit the employee work area. §11 B-203.9 U water closet shall be 17 inches minimum to 18 inches maximum from the side wall or partition,except that F.COMMUNICATION ELEMENTS AND FEATURES indication of an uppercase letter or letters shall only be used before the first word of sentences, proper 2. Spaces and elements within employee work areas shall have common use circulation paths that comply withmm o the water closet shall be 17 inches minimum and 19 inches maximum from the side wall or partition in the nouns and names, individual letters of the alphabet,initials, and acronyms. all applicable requirements of Division 4 Accessible Routes. §71 B-203.9 M ambulatory accessible toilet compartment specified in Section 11B-604.8.2 Ambulatory Accessible FIRE ALARM SYSTEMS b. Braille shall be positioned below the corresponding text in a horizontal format,flush left or centered. If 3. Spaces and elements within employee work areas shall have accessible means of egress in accordance with Compartments.Water closets shall be arranged for a left-hand or right-hand approach. text is mufti-lined, Braille shall be placed below the entire text. Braille shall be separated 3/8 inch Chapter 10,Section 1007. §71 B-203.9 W 5-11 2. Clearance around a water closet shall be 60 inches minimum measured perpendicular from the side wall and 30. Where fire alarm systems and carbon monoxide alarm systems provide audible alarm coverage,alarms shall minimum and 1/2 inch maximum from any other tactile characters and 3/8 inch minimum from raised 4. Where employee work areas have audible alarm coverage,the wiring system shall be designed so that 56 inches minimum measured perpendicular from the rear wall.A minimum 60 inches wide and 48 inches comply with 11 B-215 Fire Alarm Systems. 7 (See exception) borders and decorative elements. visible alarms complying with Chapter 9,Section 907.5.2.3.2 can be integrated into the alarm system. 5858 Wilshire Blvd #200 T: 323.954.8996 §11 B-215. a) deep maneuvering space shall be provided in front of the water closet. 20. Signs with tactile characters shall comply with 11 B-703.4 Installation Height and Location.§71 B-703.4 §11 B-203.9,§11 B-215.3 31. Alarms in public use areas and common use areas shall comply with 702 Chapter 9,Section 907.5.2.3.1. � 3. The seat height of a water closet above the finish floor shall be 17 inches minimum and 19 inches maximum §116-215 2 a. Tactile characters on signs shall be located 48 inches minimum above the finish floor or ground surface, Los Angeles, CA 90036 F: 323.954.8965 measured to the top of the seat. Seats shall not be sprung the return to a lifted position.Seats shall be 2 measured from the baseline of the lowest tactile character Braille cells and 60 inches maximum above H.BUILT-IN ELEMENTS O 32. Where employee work areas have audible alarm coverage,the wiring system shall be designed so that the floor or round surface, measured from baseline of the highest tactile character line of www.valerioinc.com • info�vaerioinc.com inches high maximum and a 3 inch high seat shall be permitted only in alterations where the existing fixture 9 9 0 visible alarms complying with 702 Chapter 9,Section 907.5.2.3.2 can be integrated into the alarm system. raised characters. 11 B-703.4.1 See exception) DINING SURFACES AND WORK SURFACES is less than 15 inches high. § ( P ) ARCHITECT C §11B-215.3 3 b. Where a tactile sin is provided at a door,the doors i shall a located f,th side the door at the latch side. p 4. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall.Where separate 33. Fire alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 g P g g OF RECORD � ARCt grab bars are required on adjacent walls at a common mounting height,an L-shaped grab bar meeting the Where a tactile sign is provided at double doors with one active leaf,the ti n shall be located on the 1. Acle surfaces and work surfaces shall comply with 11 B-902.2 and pB-902.3. ti v 9 q 1 9 9 P 9 9 (1999 or 2002 edition) (incorporated by reference,see"Referenced Standards"in Chapter 1),except that the g g P Y �� opo Vqt `7,r dimensional requirements of Sections 11 B-604.5.1 Side Wall and 11 B-604.5.2 RearWall shall be permitted. inactive leaf.Where a tactile sign is provided Where double doors with two active leafs,the sign shall be 2. cl clear floor space complying with 11 all be positioned for a forward approach shall be provided. Knee and toe �, �n ,t maximum allowable sound level of audible notification appliances complying with section rice f1 m NFPA 72 located to the right of the right hand door.Where there is no wall space at latch side of a single door clearance complyingwith 17 B-306 shall be provided. ty �� LIC. NO. V5 5. The side wall grab bars shall f 42 inches long minimum,located 12 inches maximum from the rear wall and (1 999 edition) shall have a sound level no more than 110 d8 at the minimum hearing distance from audible g g P g P U Z O n C extending 54 inches minimum from the rear wall with the front end positioned 24 inches minimum in front of to at the right side of double doors, signs shall r located space the nearest adjacent wall. Signs containing 3. The tops of dining surfaces and work surfaces shall be 28 inches minimum and 34 inches maximum above ,1_ C24228 EXPIRES o appliance. In addition, alarms in guest rooms required to provide communication features shall comply with tactile characters shall be located so that a clear floors ace of 18 inches minimum b 18 inches the finish floor or round. � EXPIRES H U the water closet. sections 4-3 and 4-4 of NFPA 72(1999 edition)or sections 7.4 and 7.5 of NFPA 72(2002 edition)and P y g . a 6. The rear grab bar shall be 36 inches long minimum and extend from the centerline of the water closet 12 minimum,centered on the tactile characters, is provided beyond the arc of any door swing between the 4. Accessible dining surfaces and work surfaces for children's use shall comply with 11 B-902.4. 7a1-1s Q. Chapter 9, Sections 907.5.2.1 and 907.5.2.3. §778-702.1 o inches minimum on one side and 24 inches minimum on the other side. closed position and 45 degree open position.Where permanent identification signage is provided for 5. Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating N�, p 7. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with Section SIGNS rooms and spaces they shall be located on the approach side of the door as one enters the room or spaces and standing spaces at the dining surfaces shall comply with 11 B-902. In addition,where work OB(.pL1� LO M 11 B-309.4 Operation except they shall be located 44 inches maximum above the floor. Flush controls shall space. Signs that identify exits shall be located on the approach side of the door as one exits the room or surfaces are provided for use by other than employees,at least 5 percent shall comply with 11B-902. be located on the open side of the water closet except in ambulatory accessible compartments complying 1. Except building directories, menus,seat and row designations in assembly areas,occupant names, building space. 6. Dining surfaces and work surfaces required to comply with 11 B-902 shall be dispersed throughout the space ego with Section 11 B-604.8.2 Ambulatory Accessible Compartments. addresses, and company names and logos, new or altered signs shall be provided in accordance with 21. Visual characters shall comply with the following,except where visual characters comply with 11 B-703.2 or facility containing dining surfaces and work surfaces for each type of seating in a functional area. Work M 8. Toilet paper dispensers shall comply with Section 11 B-309.4 Operation and shall be 7 inches minimum and 9 Raised Characters and are accompanied by Braille complying with 71 B-703.3 Braille,they shall not be surfaces required to comply with 11 B-902 shall be dispersed throughout the space or facility containing work p p P P P Y P 11 B-216 Signs and shall comply with 11 B-703 Signs.The addition of or replacement of signs shall not inches maximum in front of the water closet measured to the centerline of the dispenser.The outlet of the trigger any additional path of travel requirements.§71 B-216.1 required.to comply with 11 B-703.5.2 through 11 B-703.5.6, 11 B-703.5.8 and 11 B-703.5.9: surfaces. - dispenser shall be below the grab bar, 19 inches minimum above the finish floor and shall not be located a. Characters and their background shall have a non-glare finish. Characters shall contrast with their 7. Where food or drink is served for consumption at a counter exceeding 34 inches in height, a portion of the M P 9 2. Interior and exterior signs identifying permanent rooms and spaces shall comply with 11 B-703.1 General, N behind the grab bars. Dispensers shall not be of a type that control delivery or that does not allow continuous 11 B-703.2 Raised Characters, 11 B-703.3 Braille and 11 B-703.5 Visual Characters.Where pictograms are background with either light characters on a dark background or dark characters on a light background. main counter 60 inches minimum in length shall be provided in compliance with 11 B-902.3. N paper flow. provided as designations of permanent interior rooms and spaces,the pictograms shall comply with b. Characters shall be uppercase or lowercase or a combination of both. 8. Food service lines shall comply with 11 B-904.5.Where self-service shelves are provided,at least 50 percent, 1 9. Wheelchair accessible toilet compartments shall meet the requirements of Sections 11 B-604.8.1 Wheelchair 11B-703.6 Pictograms and shall have text descriptors complying with 11 B-703.2 and 11 B-703.5. §11 B-216.2 c. Characters shall be conventional in form.Characters shall not be italic,oblique,script, highly decorative, but no fewer than one,of each type provided shall comply with 11 B-308. Z Accessible Compartments and 11 B-604.8.3 Coat Hooks and Shelves. Compartments containing more than (See exception) or of other unusual forms. 9. Queues and waiting lines servicing counters or check-out aisles required to comply with 11B-904.3 or M i d. Characters shall be selected from fonts where the width of the uppercase letter"O"is 55-60%minimum 11 B-904.4 shall comply with 11 B-403. T- U one plumbing fixture shall comply with Section 714.8.2 Toilet and Bathing Rooms.Ambulatory accessible 3. comply with provide direction to or information about interior and exterior spaces and facilities of the site shall PP P Y N I compartments shall comply with Sections 11 B-604.8.2 Ambulatory Accessible Compartments and and 110 percent maximum of the height of the uppercase letter"I". 10. Counters in food service lines shall comply with 11 B-904.5. M P P Y ry P comply with 71 B-703.5 Visual Characters. §11 B-216.3 Q L0 e. Minimum character height shall comply with Table 11 B-703.5.5.Viewing distance shall be measured as Self-service shelves and dispensing vi fortableware, di hw r ndim condiments,f n ver ao 11 B-604.8.3 Coat Hooks and Shelves. 4. Signs for means of egress shall comply with 11 B-216.4 Means of Egress: 9 P Y 9 a Se se ce s e es a d sp s g de cos o s a e,co a s, ood and beverages CF) 10. Wheelchair accessible compartments shall be 60 inches wide minimum measure perpendicular to the side a. Signs required by Chapter 10, Section 1011.4 at doors to Doors at exit passageways, exit discharge, and the horizontal distance between the character and an obstruction preventing further approach towards shall comply with 11 B-308. U_I CT wall, and 56 inches deep minimum for wall hung water closets and 59 inches deep minimum for floor exit stairways shall be identified by tactile signs complying comply with 11 B-703.1 General, 11 B-703.2 the sign. Character height shall be based on the uppercase letter"I". * mounted water closets measured perpendicular to the rear wall.Wheelchair accessible compartments for I. Visual characters shall be 40 inches minimum above the finish floor or ground. CHECK-OUT AISLES AND SALES AND SERVICE COUNTERS P rP P Raised Characters,section 10 3 Braille and 11e Inter 5 Visual Characters. §11 B-216.4.1 Stroke thickness of the uppercase letter"I"shall be 10 percent minimum and 20 percent maximum of the = � 411 children's use shall be 60 inches wide minimum measured perpendicular to the side wall,and 59 inches b. Signs required by section 1003.2.13.5.4 of the International Building Code(2000 edition)or section g' PP P P („� `p deep minimum for wall hung and floor mounted water closets measured perpendicular to the rear wall. 1007.6.4 of the International Building Code(2003 edition) (incorporated by reference, see"Referenced height of the character. 17. Where provided,check-out aisles,sales counters,service counters,food service lines, queues, and waiting } N 11. In a wheelchair accessible compartment with an in-swing door, a minimum 60 inches wide by 36 inches deep Standards"in Chapter 1)Chapter 10, Section 1007.11 to provide instructions in areas of refuge shall h. Character spacing shall be measured between the two closest points of adjacent characters, excluding lines shall comply with 11 B-227 and 11B-904. 06 Z MI maneuvering space shall be provided in front of the clearance required in Section 11 B-604.8.1.1 Wheelchair comply with 11 B-703.5 Visual Characters. Signs required by Chapter 10,Section 1007.9 at doors to word spaces.Spacing between individual characters shall be 10 percent minimum and 35 percent 18. All portions of counters required to comply with 11 B-904 shall be located adjacent to a walking surface ^ 07 Accessible Compartment Size. areas of refuge and exterior areas for assisted rescue shall comply with 11 B-703.1 General, 11 B-703.2 maximum of character height. complying with 11 B-403. 0 = O 1 12. In a wheelchair accessible compartment with a side-opening door, either in-swinging or out-swinging, a Raised Characters, 118-703.3 Braille and 11 B-703.5 Visual Characters and include an International I. Spacing between the baselines of separate lines of characters within a message shall be 135 percent 19. Sales counters and service counters shall comply with either of the following and the accessible portion of the I- �, minimum 60 inches wide and 60 inches deep maneuvering space shall be provided in front of the water Symbol of Accessibility(ISA)complying with 11 B-703.7.2.1 ISA. §11 B-216.4.2 minimum and 170 percent maximum of the character height. counter top shall extend the same depth as the sales or service counter top. Q uj LLI Y 2 closet. j. Text shall be in a horizontal format. a. A portion of the counter surface that is 36 inches long minimum and 34 inches high maximum above the fn 1 c. Signs required by section g Cod .13.6 of the International Building Code(2000 edition)ensection dards LU U -0 13. In a wheel chair accessible compartment with end-opening door(facing water close[),either in-swinging or of the International Building Code(2003 edition) (incorporated by reference, see"Referenced Standards" 22. Symbols of accessibility and[heir background shall have a non glare finish.Symbols of accessibility shall finish floor shall be provided. A clear floor or ground space complying with 11 B-305 shall be positioned for . O Q L1.I C oul swinging, a minimum 60 inches wide and 48 inches dee maneuvering space shall be provided in front contrast with their background with either a light symbol on a dark background or a dark symbol on a light a parallel approach adjacent to the 36 inch minimum length of counter. UJ M = N 9 9. P g P P in Chapter 1) Chapter 10, Section 1007.10 to provide directions to accessible meansof egress shall 5 LL p I- of the water closet. background.§71 B-703.7.1 b. A portion of the counter surface that is 36 inches long minimum and 34 inches high maximum shall be comply with 11 B-703.5 Visual Characters.§71 B-216.4.3 Q (n Q -O 14. Toilet compartment doors,including door hardware,shall comply with Section 11 B-404 Doors, Doorways, d. Signs required by Chapter 10, Section 1008.1.9.7,item 5.1 at doors with delayed egress locks shall 25. Symbols shall comply with the following: provided. Knee and toe space complying with 11 B-306 shall be provided under the counter.A clear floor Z p and Gates except that if the approach is from the push side of the compartment door,clearance between the comply with 11 B-703.1 General, 11 B-703.2 Raised Characters, 11 B-703.3 Braille and 11 B-703.5 Visual a. The International Symbol of Accessibility shall comply with Figure 11 B-703.7.2.1 ISA.The symbol shall or ground space complying with 11 B-305 shall be positioned for a forward approach to the counter. -_ 2 p- CiJ I- iL door side of the compartment and any obstruction shall be 48 inches minimum measured perpendicular to Characters. §11B-216.4.4 consist of a white figure on a blue background.The blue shall be Color No. 15090 in Federal Standard 20. Where provided,at least one of each type of sales counter and service counter shall comply with 11 B-904.4. U U U Z 0 I the compartment door in its closed position. Door shall be located in front partition or in the side wall or 5958. §11 B-703.7.2.1 (See exception) Where counters are dispersed throughout the building or facility,counters complyingwith 11B-904.4 also shall W w Lr) = P P P 5. Parking spaces complying with 11 B-502 Parking Spaces shall be identified by signs complying with P 9 9 ty• ' MM ' O Q 2 partition farthest from the water closet. 11 B-502.6 Identification. §11 B-216.5 b. The International Symbol of TTY shall comply with Figure 11 B-703.7.2.2. be dispersed. O LL O CO rr O Q 15. Where toilet compartment doors are located in the front partition,the door opening shall be 4 inches 6. In residential facilities,where parking spaces are assigned to specific residential dwelling units, identification c. Telephones with a volume control shall be identified by a pictogram of a telephone handset with radiating 21. Queues and waiting lines servicing counters or check-cut aisles required to comply with 11 B-904.3 or Ce CE maximum from the side wall or partition farthest from the water closet.Where located in the side wall or sound waves on a square field such as shown in Figure 11 B-703.7.2.3. 11 B-904.4 shall comply with 11B-403. O. Q aL � LL CE rn P of accessible parking spaces shall not be required. Y partition,the door opening shall be 4 inches maximum from the front partition and the door shall be self- d. Assistive listening systems shall be identified by the International Symbol of Access for Hearing Loss P P 9 P 7. In existing buildings and facilities where not all entrances comply with 11 essib Doors, Doorways,and Gates, closing. compliant entrances shall be identified by the International Symbol of Accessibility(ISA)complying with complying with Figure 11 B-703.7.2.4. RESTAURANT,CAFETERIAS, BANQUET FACILITIES, BARS, PERFORMANCE AREAS.PRESS BOXES. STORE #: 10183 16. A door pull complying with Section 11 B-404.2.7 Door and Gate Hardware shall be placed on both sides of 11 B-703.7.2.1 ISA. Directional signs complying with 11 B-703.5 Visual Characters that indicate the location of e. Rooms,facilities and paths of travel that are accessible to and usable by people who are adversely EMPLOYEE AREAS. M the door near the latch. Door shall not swinginto the clear floors ace or clearance required for an fixture. impacted by airborne chemicals or particulate(s)and/or the use of electrical fixtures and/or devices shall PROJECT #: 27237-038 P q Y the nearest entrance complying with 11 B-404 shall be provided at entrances that do not comply with 11 B-404 in Doors ma swin into that rtion of the maneuverin s ace which does not over) the clearance re uired be identified by the Cleaner Air Symbol complying with Figure 11 B-703.7.2.5.This symbol is to be used 1. Within a site.At least one accessible route shall connect accessible buildings, Y 9 Po 9 P ap q Doors, Doorways,and Gates. Directional signs complying with 1 route t .5 Visual Characters, including the gs,accessible facilities,accessible at a water closet. ISA complying with 118-703.7.2.1 ISA, indicating the accessible route to the nearest accessible entrance strictly for publicly funded facilities or any facilities leased or rented by state of California, not elements,and accessible spaces that are on the same site. §776.206.2.2 CASEWORK CONCEPT: 17. At least one side partition shall provide a toe clearance of 9 inches minimum above the finish floor and 6 concessionaires.The symbol,which shall include the text"Cleaner Air"as shown, shall be displayed 2. Entrances shall be provided in accordance with Section 716-206.4. Entrance doors,dooms s,and gates ISSUE DATE: ap P P shall-2 provided at functions when the accessible route diverges from the regular circulation path. P Y inches deep minimum beyond the compartment-side face of the partition,exclusive of partition support §11 B-216.6(See exceptions) either as a negative or positive image within a square that is a minimum of 6 inches on each side.The shall comply with Section i 18-404 and shall be on an accessible route complying with Section i/8-402. DESIGN MANAGER: M. MONTENEGRO o members. Partition components at toe clearances shall be smooth without sharp edges or abrasive surfaces. symbol may be shown in black and white or in color.When color is used, it shall be Federal Blue(Color 11B-206.4 P P 9 8. Where existing elevators io not comply with a B-407 Elevators,compliant elevators shall S clearly § LEEDS AP: M Compartments for children's use shall provide area clearance of 12 inches minimum above the finish floor. No. 15090 Federal Standard 5956)on white,or white on Federal Blue.There shall be at least a 70- 3. Toile[rooms and bathing rooms.Where toilet rooms are provided, each toilet room shall comply with Section M P p identified with the International Symbol of Accessibility(ISA) complying with i i B-703.comply ISA. Existing 9 P P Y cy 18. Grab bars shall comply with Section 11 B-609 Grab Bars.Aside-wall grab bar complying with Section buildings that have been remodeled to provide specific elevators for public use that comply with these percent color contrast between the background of the sign from the surface that itis mounted on. 116-603.Where bathing rooms are provided,each bathing room shall comply with Section 116-603. PROGRAM MANAGER: W 11 B-604.5.1 Side Wall shall be provided and shall be located on the wall closest to the water closet. In building standards shall have the location of and the directions to these elevators posted in the building lobby I. Edges of signs shall be rounded,chamfered or eased. Corners of signs shall have a minimum radius of §11B-213.2 I CHECKED BY: VALERIO N addition,a rear-wall grab bar complying with Section 11 B-604.5.2 Rear WaII shall be provided.Where on a sign complying with 11 B-703.5 Visual Characters, including the ISA complying with 11 B-703.7.2.1 ISA. Y.inch. 4. Scope. All areas of newly designed and newly constructed buildings and facilities and altered portions of separate rob bars are required on adjacent walls at a common mounting height, an L-shaped rob bar g. Pole-supported pedestrian traffic-control buttons shall be identified with color coding consisting of a existing buildings and facilities shall comply with these requirements. IIB-201.1 .0 9 q 1 9 9 P 9 §11 B-216.7 9 9 PY 9 § Revision Schedule d meeting the dimensional requirements of Sections 11 B-604.5.1 Side Wall and 11 B-604.5.2 Rear Wall shall 9. Identification and directional signs for public TTYs shall be provided in accordance with 11 B-216.9 TTYs. textured horizontal yellow band 2 inches in width encircling the pole, and a 1-inch-wide dark border band 5. In restaurants,cafeterias,banquet facilities, bars,and similar facilities, an accessible route shall be provided W be permitted. §11 B-216.9 above and below this yellow band. to all functional areas, including raised or sunken areas,and outdoor areas.§11 B-206.2.5 Rev Date By Description 19. Ambulatory accessible compartments shall have a depth of 35 inches minimum and 37 inches maximum. a. Public TTYs shall be identified by the International Symbol of TTY complying with 11 B-703.7.2.2 6. Where a circulation path directly connects a performance area to an assembly seating area, an accessible 05-23-18 SS 90 PERCENT CD SET 20. Water closets and toile[compartments for children's use shall comply with Section 71 B-604.9 Water Closets P P Y International Symbol aTTY.§718-216.9.1 G.SPECIAL ROOMS,SPACES,AND ELEMENTS route shall directly connect the assembly seating area with the performance area. er accessible route shall } and Toilet Compartments for Children's Use and follow suggested dimensions on Table 11 B-604.9. b. Directional signs indicating the location of the nearest public TTY shall be provided at all banks of public be provided from performance areas to ancillary areas or facilities used by performers unless exempted by 06-06-18 SS 1 ST SUBMITTAL SET 21. Urinals shall be the stall-type or the wall-hung type with the rim 17 inches maximum above the finish floor or pay telephones not containing a public TTY. In addition,where signs provide direction to public pay 11 B-206.2.3 Mula-Story Buildings and Facilities, (See exceptions 1 through 7). §11 B-206.2.6 1 ground. Urinals shall be 13 inches deep minimum measured from the outer face of the urinal rim to the back telephones,they shall also provide direction to public TTYs. If a facility has no banks of telephones,the KITCHEN. KITCHENETTES AND WET BARS 7. Press boxes in assembly areas shall be on an accessible route.§11 B-206.2.7(See exceptions) 2 of the fixture. directional signage shall be provided at the entrance or in a building directory. Directional signs shall 8. Common use circulation paths within employee work areas shall comply with 11 B-402 Accessible Routes. g 22. A clear floor space or ground space complying with Section 11B-305 Clear Floor or Ground Space positioned comply with 11B-703.5 and shall include the International Symbol of TTY complying with 11 B-703.7.2.2. 1. Dimension 40 inch minimum clearance between counters, appliances, or cabinets in pass through kitchens. §71 B-206.2.8(See exceptions) for forward approach shall be provided. §11 B-216.9.2 Pass through kitchens shall have two entries. §11 B-804.2.1 9. At dining and work surfaces required to be accessible, knee clearance shall be provided that is 30 inches in SHEET TITLE: 23. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with Section 14. Each assembly area required by 11 B-219 Assistive Listening Systems to provide assistive listening systems 2. Dimension 60 inch minimum clearance between opposing base cabinets,counter tops,appliances,or walls width at 27 inches above the finish floor or ground for a depth of at least 19 inches.§11 B-306.3 2 11 B-309 Operable Parts except that the flush control shall be mounted at a maximum height of 44 inches shall provide signs informing patrons of the availability of the assistive listening system. The sign shall in U-shaped kitchens. §11 B-804.2.2 ADA NOTES IL above the finish floor. include wording that states"Assistive-Listening System Available"and shall be posted in a prominent place CD 24. Lavatories and sinks shall comply with Section 11 B-606 Lavatories and Sinks. at or near the assembly area entrance.Assistive listening signs shall comply with 11B-703.5 Visual 25. For lavatories and sinks, a clear floor space complying with Section 11 B-305 Clear Floor or Ground Characters and shall include the International Symbol of Access for Hearin Loss complying with 0o Y 9 PY 9 SCALE:AS SHOWN N Surfaces, positioned for a forward approach, and knee and toe clearance complying with Section 116-306 118-703.7.2.4 Assistive Listening Systems.§71 B-216.10(See exception) u7 Knee and Toe Clearance shall be provided. SHEET NUMBER: co 26. Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches Cmaximum above the finish floor or ground. G-0031-oo�i t l� I