Laserfiche WebLink
DO NOT UNDER ANY CIRCUMSTANCES, DRILL, CUT <br />OR TAP ANYWHERE ON THE F -SERIES FITTING <br />lectri <br />on <br />ipe Installation <br />STEP Cl) Only PVC -Coated ROBROYTm Brand conduit (for F -1X -RR fittings) or standard hot- <br />dip galvanized conduit (for F -1X -SS fittings) are allowed in this installation. (Fig. C2) <br />STEP C2) Dry fit your Conduit and mark a line along the pipe (Fig. C2) where it meets the edge <br />of the F -Series fitting on the outside of the sump. <br />Fig. C2 <br />Mark <br />here <br />1/2" <br />7" <br />LIGHTLY <br />Hand Sand <br />this portion <br />with 80 Grit <br />DO NOT INJECT ADHESIVE YET <br />Only ROBROYT11 Brand PVC - <br />Coated (F -1X -RR) or any brand <br />hot -dip galvanized conduit (F -1X - <br />SS) is allowed and Warranted <br />with Bravo Systems F -Series <br />SingleWall Electrical Fitting <br />STEP C3) From your mark line, you must lightly sand the galvanized conduit a Half Inch (1/2") <br />away from the fitting and Seven Inches (7") towards the fitting, 360° around. Fig. C2. <br />You must then blow the area with compressed air and clean with acetone using clean rags. <br />8 ii -F -Series -1X -SS -11A <br />