COMPLIANCE INFO 2013 - 2018 - Laserfiche WebLink

Home Browse Search

7. UNDER -DISPENSER CONTAINMENT (UDC) TESTING Test Method Developed By: ❑ UDC Manufacturer p Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Spec) st Equipment Used: Incon Sump Tester Equipment Resolution: +/- 0.002 Inches iUDC # 17/18 UDC # 19/20 UDC # UDC # UDC Manufacturer: Western Fiberglass Western Fiberglass UDC Material: Fiberglass Fiberglass UDC Depth: 31" 31" Height from UDC Bottom to Top of Highest Piping Penetration: 5" s" Height from UDC Bottom to Lowest Electrical Penetration: 10" 1011' Condition of UDC prior to Good Good testing: Portion of UDC Tested' 2" Above Piping 2" Above Piping Does turbine shut down when UDC sensor detects liquid (both N/A N/A product and water)?* Turbine shutdown response time N/A N/AN/A N/A N/A Is system programmed for fail- El Yes [INo m NA ElYes ElNo R1 NA ElYes ElNo ElNA ❑ Yes ElNo ElNA safe shutdown? Was fail-safe verified to be operational?* ❑ yes ❑ No 23 NA ❑ Yes ❑ No 0 NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and 30 Minutes 30 Minutes 30 Minutes 30 Minutes starting test Test Start Time: Initial Reading (RI): Inches Inches Inches Inches Test End Time: Final Reading (RF): Inches Inches Inches Inches Test Duration: Chane in Reading (RF -R,): Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? 10 es ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and ❑ yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA verified functional after testing? Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) UDC 17/18, 19/20 Visually failed due to jumper lines. "Sensor functionality was not confirmed. This procedure is not part of the Secondary Containment testing scope of work".