Laserfiche WebLink
7 <br />INSTALLATION, CONT’D.: FRONT PANEL & GRILLE REMOVAL / SECURE REFRIG. ASS’Y PARTS <br />5. Remove Front Panel / Remove Lower Front Grille <br /> <br />Remove by lifting up and off hooks. <br />No screw removal is required. <br />See illustrations at top-right. <br />Make certain that magnetic air filter is in place (as shown <br />immediately below and at lower-right). <br /> <br />6. Check That No Shifting or Separation of <br />Refrigeration Assembly Parts Has Occurred <br /> <br />To check refrigeration assembly, remove the (3) base rail <br />screws keeping it secure during shipment. <br />Refrigeration assembly pan rests on plastic glides. <br />Slide refrigeration assembly out from under case, and <br />check that no parts have shifted or separated from <br />assembly. <br />Also, confirm that wicking material is securely in place <br />(held securely in upright prongs) as shown below-left. <br />Lift Off Front Panel and Lower <br />Front Grille From Hooks <br />Refrigeration Assembly [Shown Rotated] <br />Slid Out From Under Front of Case <br />Remove 2 to 3 Base <br />Rail Screws to Allow <br />Refrigeration Package <br />to Slide Out <br />From Under Case <br />Wicking Material <br />To Be in Place <br />Remove Front Panel From Case <br />[Shown Rotated in Below Illustration] <br />Remove Lower <br />Front Grille <br />Magnetic Air Filter at Front of Case [After Grille Removed] <br />View of Magnetic Air Filter at Front <br />of Case [After Grille Removed]