COMPLIANCE INFO 2013 - 2017 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page_4_of—8- 6. MING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer N Industry Standard ❑Professional Engineer ❑ Other(Spec) Test Method Used: ❑Pressure ❑Vacuum N Hydrostatic ❑ Other(Spec) Test Equipment Used: INCON SUMP TESTER Equipment Resolution:+/-0.002" Sump#87(1) Sump#87(2) Sump#91 Sump# Sump Diameter: 48" 48" 48" Sump Depth: 63" 65" 64" Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS Height from Tank Top to Top of 27„ 28" 20" Highest Piping Penetration: Height from Tank Top to Lowest 16" 17" 22" Electrical Penetration: Condition of sump prior to testing: DRY DRY DRY Portion of Sump Tested' ABOVE ABOVE ABOVE PENETRATIONS PENETRATIONS PENETRATIONS Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No ®NA ❑Yes [--]No N NA [-]Yes ❑No N NA ❑Yes ❑No ❑NA product and water)?* Turbine shutdown response time N/A N/A N/A Is system programmed for fail-safe ❑yes [--]No N NA ❑Yes [—]No N NA [--]Yes ❑No ®NA ❑Yes ❑No ❑NA shutdown?* Was fail-safe verified to be ❑yes [—]No N NA ❑Yes [-]No N NA ❑Yes ❑No ®NA ❑Yes ❑No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting 10 MIN 10 MIN 10 M I N test: Test Start Time: 10:01 AM 10:01 AM 10:45 AM Initial Reading(R,): 1.3999" 4.3215" 1.7602" Test End Time: 10:16 AM 10:16 AM 11:00 AM Final Reading(RF): 1.4000" 4.3217" 1.7602" Test Duration: 15 MIN 15 MIN 15 MIN Change in Reading(RF-R,): 0.0001" 0.0002" 0.0000" Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" +/-0.002" +/-0.00211 Test Result: N Pass ❑ Fail N Pass ❑ Fail N Pass ❑ Fail ❑Pass ❑ Fail Was sensor removed for testing? N Yes ❑No ❑NA N Yes [-]No ❑NA N Ycs [-]No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testing? ®Yes El No El NA NYes [:]No [:INA ®Yes ❑No ❑NA ❑Yes ❑No ❑NA Comments-(include information on repairs made prior to testing, and recommended follow-up for failed tests) ABOVE IS THE LAST OF TWO BACK TO BACK 15 MINUTE TESTS ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)