COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

15 February 2016 AdvancedGeo AGE Project No. 12-2181 Environmental Page 4 of 23 and the requirements of 40 CFR part 112; that procedures for required inspections and testing have been established; and that this Plan is adequate for the Facility [40 CFR 112.3(d)]. The PE certification in no way relieves the owner or operator of the Facility of his/her duty to prepare and fully implement this Plan in accordance with the requirements of 40 CFR part 112. This Plan is valid only to the extent that the Facility owner or operator maintains, tests, and inspects equipment, containment, and other devices as prescribed in this Plan. 2.3. LOCATION OF THE SPCCP (40 CFR 112.3(e)) In accordance with 40 CFR 112.3(e), a complete copy of this Plan is maintained at the Shop office. The shop office is accessible at a minimum, whenever the Facility is operating, i.e., 8:00 AM to 5:00 PM, 5 days per week (other days to be determined). Field staff conducts operations seasonally, as determined by the Facility Management. 2.4. PLAN REVIEW (40 CFR 112.3 and 112.5) Technical and administrative plan reviews occur for changes in Facility configuration, as a scheduled five year plan review and are recorded on the Record of Plan Review form included as Table 1. 2.4.1. Changes in Facility Configuration In accordance with 40 CFR 112.5(a), the Facility periodically reviews and evaluates this Plan for any change in Facility design, construction, operation, or maintenance that materially affects the Facility's potential for an oil discharge, including, but not limited to: • Commissioning of containers; • Reconstruction, replacement, or installation of piping systems; • Construction or demolition that might alter secondary containment structures; or • Changes of product or service, revisions to standard operation, modification of testing/inspection procedures, and use of new or modified industry standards or maintenance procedures. 2.4.2. Technical Plan Amendment Plan amendments made to address changes of Facility configuration (Section 2.4.1.) are referred to as technical amendments and are certified by a PE. Technical Plan amendments are documented on Table 1 .