COMPLIANCE INFO 2007 - 2009 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 6 of 10 6. PIPING SUM IP TESTING Test Method Developed By: ❑Sump Manufacturer X Industry Standard ❑Professional Engineer ❑Other(Spew) Test Method Used: 0 Premure ❑Vacuum X Hydrostatic 0 Other(Specify) Test Equipment Used: lncon TS STS Equipment Resolution: Sump—R.P.S. Sump—P.P.S. Sump- Sump- Sump Diameter: 42" 42" Sump Depth- 60" 64" Sump Material: Fiberglass I Fiberglass Height from Tank Top to Top of 12" 121, Highest Pipipj Penetration: Height from Tank Top to Lowest 2211 23„ Electrical Penetration: Condition of sump prior to testing: Clean Clean Portion of Sump Tested' I Full Full Does turbine shut down when sump sensor detects liquid(both X Yes 0 No 1 NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water?* Turbine shutdown response time 2 Seconds 2 Seconds Is system programmed for fail-safe X Yes ❑No ❑NA X Yes F_-No C NA ❑Yes ❑No ❑NA ❑Yes ❑No 0 NA shutdown?' Was fail-safe verified to be X Yes []No ❑NA X Yes ❑No ❑NA n Yes ❑No 01 NA ❑Yes ❑No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting 15 minutes 15 minutes test: Test Stan Time: 11:21 11:21 Initial Reading(R0: 6.3062" 6.3528" Test End Time: 11:36 11.:36 Final Reading(RF): 6.3057' 6.3521" Test Duration: 15 minutes 15 minutes Change in.Reading(RF-R,): Loss.0005" Loss .0007' Pass/Fail Threshold or Criteria: Loss<.002"=pass Loss<.002"amass Teen Result: X Pass ❑Fail X Pass ❑Fail [2 Pass D Fall D Pass ❑Fail Was sensor removed for testing? X Yes ❑No ❑NA X Yes 0 No 0 NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and X Yes ❑No ❑NA X Yes ❑No [INA 0 Yes ©No 1--INA ❑Yes 7-No DNA verified functional after testing? COxI Ments—(include inf,? nTq ion on repairs made prior to testing and recomm@ndedfollow-up for failed tests1 Install new SSI test boots at the ends of all of the piping rens in the sumps and UDC's Verify that they have no leaks with soapy water. Tightest all clamps on the entries including the electrical. Plug the opening in the transition boot of the rock guard. ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to my of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SV,RCB LG-160)